About Township 8 Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Township 8: Pratt County Fire 453.4875 MHz, narrow FM, no tone. County-level ems dispatch that covers Township 8: Pratt County EMS 453.8250 MHz, narrow FM, 731 DPL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Pratt County EMS talkgroup 662 (hex 296).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Township 8, start with the Fellsburg site of Kansas Statewide Interoperable Communication System (KSICS), about 15 miles away. Its control channels: 852.3125, 852.6125 MHz.
Data updated .
Pratt County channels that also cover Township 8
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pratt County Fire | Fire/EMS West | 453.4875 In 458.4875 | FMN | WQDG938 | |
| Pratt County Fire | Pratt County Fire – Dispatch | 460.6250 In 465.6250 | 731 DPL | FMN | WNKD210 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pratt County EMS | Pratt County EMS – Dispatch | 453.8250 In 458.8250 | 731 DPL | FMN | WPJK625 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pratt County Hospital | EMS to Hospital | 463.1250 In 468.1250 | 192.8 PL | FMN | — |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pratt County EMS | Pratt County EMS – Dispatch | 662 | 296 | D |
| Pratt County Hospital | Pratt Regional Medical Center | 669 | 29d | D |
Nearest trunked radio sites
Distances are measured from the center of Township 8.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Township 8?
We do not have a fire dispatch channel listed specifically for Township 8. The county-level fire dispatch channels in the same county: Pratt County Fire 453.4875 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Township 8?
We do not have a EMS dispatch channel listed specifically for Township 8. The county-level EMS dispatch channels in the same county: Pratt County EMS 453.8250 MHz, narrow FM, 731 DPL.
Do fire departments and EMS use a trunked radio system in Township 8?
Yes. The county-level systems that cover Township 8 are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Township 8?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Township 8?
For Township 8, start with the Fellsburg site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.