About Clear Creek Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Clear Creek: Stafford County Fire 453.7875 MHz, narrow FM, 107.2 PL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Data updated .
Stafford County channels that also cover Clear Creek
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Stafford County Fire | Fire and EMS Dispatch | 453.7875 In 458.7875 | 107.2 PL | FMN | WPXI751 |
Nearest trunked radio sites
Distances are measured from the center of Clear Creek.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Clear Creek?
We do not have a fire dispatch channel listed specifically for Clear Creek. The county-level fire dispatch channels in the same county: Stafford County Fire 453.7875 MHz, narrow FM, 107.2 PL.
What scanner do I need to listen to fire and EMS in Clear Creek?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Clear Creek?
For Clear Creek, start with the Fellsburg site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.