Skip to content

Jefferson Fire and EMS Frequencies

We do not have frequencies listed specifically for Jefferson in Rawlins County, Kansas yet. Countywide channels for Rawlins County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Halford (Kansas Statewide Interoperable Communication System (KSICS)), about 16 miles away.

About Jefferson Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Jefferson: Rawlins County Fire 155.8950 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Rawlins County Fire talkgroup 4539 (hex 11bb).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Jefferson, start with the Halford site of Kansas Statewide Interoperable Communication System (KSICS), about 16 miles away. Its control channels: 852.2375, 852.9 MHz.

Data updated .

Rawlins County channels that also cover Jefferson

Fire Dispatch

Fire Dispatch frequencies for Rawlins County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rawlins County FireRawlins County Fire – Dispatch (Dispatch before KSCIS)155.8950
In 158.8950
FMNWQFE306

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Rawlins County FireRawlins County Fire – Dispatch453911bbD
Rawlins County FireRawlins County Fire – Tactical Channel454011bcD
Rawlins County EMSRawlins County EMS – Dispatch453511b7D
Rawlins County EMSEMS Medical453611b8D
Rawlins County EMSRawlins County EMS – Tactical Channel453711b9D

Nearest trunked radio sites

Distances are measured from the center of Jefferson.

Halford · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 36 (hex 24) · NAC 1B5 · about 16 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
Oberlin · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 34 (hex 22) · about 19 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
Colby · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 59 (hex 3B) · NAC 1B1 · about 20 mi away
Control 857.4625, 857.9625
Voice 856.4625, 858.4625, 859.4625, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Jefferson?

We do not have a fire dispatch channel listed specifically for Jefferson. The county-level fire dispatch channels in the same county: Rawlins County Fire 155.8950 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Jefferson?

Yes. The county-level systems that cover Jefferson are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Jefferson?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Jefferson?

For Jefferson, start with the Halford site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.