About Lacey Fire and EMS Frequencies
Quick answer: County-level ems dispatch that covers Lacey: Thomas County EMS 462.9500 MHz, narrow FM, 192.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Thomas County EMS talkgroup 4461 (hex 116d).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Lacey, start with the Halford site of Kansas Statewide Interoperable Communication System (KSICS), about 6 miles away. Its control channels: 852.2375, 852.9 MHz.
Data updated .
Thomas County channels that also cover Lacey
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Thomas County EMS | Thomas County EMS – Dispatch (before KSICS) | 462.9500 In 467.9500 | 192.8 PL | FMN | KNBJ887 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Thomas County EMS | County EMS Dispatch | 4461 | 116d | D |
Nearest trunked radio sites
Distances are measured from the center of Lacey.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does EMS or the ambulance service use in Lacey?
We do not have a EMS dispatch channel listed specifically for Lacey. The county-level EMS dispatch channels in the same county: Thomas County EMS 462.9500 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Lacey?
Yes. The county-level systems that cover Lacey are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Lacey?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Lacey?
For Lacey, start with the Halford site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.