About Rocewood Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Rocewood: Rawlins County Fire 155.8950 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Rawlins County Fire talkgroup 4539 (hex 11bb).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Rocewood, start with the McDonald site of Kansas Statewide Interoperable Communication System (KSICS), about 4 miles away. Its control channels: 852.4625, 852.725 MHz.
Data updated .
Rawlins County channels that also cover Rocewood
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rawlins County Fire | Rawlins County Fire – Dispatch (Dispatch before KSCIS) | 155.8950 In 158.8950 | FMN | WQFE306 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Rawlins County Fire | Rawlins County Fire – Dispatch | 4539 | 11bb | D |
| Rawlins County Fire | Rawlins County Fire – Tactical Channel | 4540 | 11bc | D |
| Rawlins County EMS | Rawlins County EMS – Dispatch | 4535 | 11b7 | D |
| Rawlins County EMS | EMS Medical | 4536 | 11b8 | D |
| Rawlins County EMS | Rawlins County EMS – Tactical Channel | 4537 | 11b9 | D |
Nearest trunked radio sites
Distances are measured from the center of Rocewood.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Rocewood?
We do not have a fire dispatch channel listed specifically for Rocewood. The county-level fire dispatch channels in the same county: Rawlins County Fire 155.8950 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Rocewood?
Yes. The county-level systems that cover Rocewood are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Rocewood?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Rocewood?
For Rocewood, start with the McDonald site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4625, 852.725 MHz. Program a control channel first; the scanner finds the voice channels from it.