About Dayton Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Dayton: Saline County Fire 453.0750 MHz, narrow FM, 123.0 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Saline County Fire talkgroup 5091 (hex 13e3).
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Dayton, start with the Bennington site of Kansas Statewide Interoperable Communication System (KSICS), about 11 miles away. Its control channels: 851.7375, 852.0625 MHz.
Data updated .
Saline County channels that also cover Dayton
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Saline County Fire | Rural Fire Secondary | 453.0750 In 458.0750 | 123.0 PL | FMN | WNVC670 |
| Saline County Fire | Rural Fire Page Out | 453.7375 In 458.7375 | 110.9 PL | FMN | WNVC670 |
| Saline County Fire | Rural Fire Dispatch | 460.5500 In 465.5500 | 123.0 PL | FMN | WNVC670 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Saline County Fire | Fire District 2 | 460.1000 | FMN | — | |
| Saline County Fire | Fire District 7 | 460.6750 | FMN | — | |
| Saline County Fire | Fire District 6 | 464.1000 | FMN | — | |
| Saline County Fire | Fire District 5 | 464.9750 | FMN | — | |
| Saline County Fire | Fire District 1 | 465.1500 | FMN | WNVC670 | |
| Saline County Fire | Fire District 3 | 465.4500 | FMN | WNVC670 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Saline County Fire | Fire Page Out | 5091 | 13e3 | D |
| Saline County Fire | County Fire District | 5092 | 13e4 | D |
| Saline County Fire | Fire District 1 | 5093 | 13e5 | D |
| Saline County Fire | Fire District 2 | 5094 | 13e6 | D |
| Saline County Fire | Fire District 3 | 5095 | 13e7 | D |
| Saline County Fire | Saline County Fire – Tactical Channel | 5096 | 13e8 | D |
| Saline County Fire | County Fire District | 5097 | 13e9 | D |
| Saline County Fire | Fire District 6 | 5098 | 13ea | D |
| Saline County Fire | Fire District 7 | 5099 | 13eb | D |
Nearest trunked radio sites
Distances are measured from the center of Dayton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Dayton?
We do not have a fire dispatch channel listed specifically for Dayton. The county-level fire dispatch channels in the same county: Saline County Fire 453.0750 MHz, narrow FM, 123.0 PL.
Do fire departments and EMS use a trunked radio system in Dayton?
Yes. The county-level systems that cover Dayton are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Dayton?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Dayton?
For Dayton, start with the Bennington site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7375, 852.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.