About Wilcox Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Wilcox: Trego County Fire 158.8350 MHz, narrow FM, 141.3 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Trego County Fire talkgroup 4355 (hex 1103).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wilcox, start with the Ellis site of Kansas Statewide Interoperable Communication System (KSICS), about 20 miles away. Its control channels: 852.3125, 852.6125 MHz.
Data updated .
Trego County channels that also cover Wilcox
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Trego County Fire | Trego County Fire – Dispatch (Dispatch before KSICS) | 158.8350 In 153.7400 | 141.3 PL | FMN | WPWT921 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Trego County Fire | Trego County Fire – Dispatch | 4355 | 1103 | D |
| Trego County Fire | Trego County Fire – Tactical Channel | 4356 | 1104 | D |
| Trego County Fire | Trego County Fire – Tactical Channel | 4357 | 1105 | D |
| Trego County EMS | Trego County EMS – Tactical Channel | 4354 | 1102 | D |
Nearest trunked radio sites
Distances are measured from the center of Wilcox.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Wilcox?
We do not have a fire dispatch channel listed specifically for Wilcox. The county-level fire dispatch channels in the same county: Trego County Fire 158.8350 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Wilcox?
Yes. The county-level systems that cover Wilcox are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Wilcox?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Wilcox?
For Wilcox, start with the Ellis site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.