Skip to content

Lincoln Fire and EMS Frequencies

We do not have frequencies listed specifically for Lincoln in Washington County, Kansas yet. Countywide channels for Washington County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Randolph (Riley County), about 11 miles away.

About Lincoln Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Lincoln: Washington County Fire 154.8000 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Washington County Fire talkgroup 4807 (hex 12c7).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Lincoln, start with the Randolph site of Riley County, about 11 miles away. Its control channels: 851.1375, 851.475, 852.5875 MHz.

Data updated .

Washington County channels that also cover Lincoln

Fire Dispatch

Fire Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireWashington County Fire – Dispatch154.8000
In 159.1950
FMNWNPU316

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireWashington County Fire – Fire Ground /Tactical154.0700FMNWPLS377
Washington County FireWashington County Fire – Tactical Channel155.775077.0 PLFMNWNPU316

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County FireWashington County Fire – Dispatch480712c7D
Washington County EMSWashington County EMS – Dispatch480812c8D

Nearest trunked radio sites

Distances are measured from the center of Lincoln.

Randolph · Riley County
RFSS 33 · Site 33 (hex 21) · NAC 021 · about 11 mi away
Control 851.1375, 851.475, 852.5875, 853.3
Blue Rapids · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 11 (hex B) · about 15 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
Olsburg · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 58 (hex 3A) · NAC 1BE · about 16 mi away
Control 854.2625, 855.9875
Voice 854.0125, 856.2625, 856.9625, 857.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Lincoln?

We do not have a fire dispatch channel listed specifically for Lincoln. The county-level fire dispatch channels in the same county: Washington County Fire 154.8000 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Lincoln?

Yes. The county-level systems that cover Lincoln are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Lincoln?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Lincoln?

For Lincoln, start with the Randolph site of Riley County. Its control channels are 851.1375, 851.475, 852.5875, 853.3 MHz. Program a control channel first; the scanner finds the voice channels from it.