Skip to content

Webster Fire and EMS Frequencies

We do not have frequencies listed specifically for Webster in Wilson County, Kansas yet. Countywide channels for Wilson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Buffalo (Kansas Statewide Interoperable Communication System (KSICS)), about 12 miles away.

About Webster Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Webster: Wilson County Fire 453.0250 MHz, narrow FM, 107.2 PL. County-level ems dispatch that covers Webster: Wilson County EMS 453.4500 MHz, narrow FM, 156.7 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Wilson County channels that also cover Webster

Fire Dispatch

Fire Dispatch frequencies for Wilson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilson County FireWilson County Fire – Dispatch453.0250
In 458.0250
107.2 PLFMNWQPP339

EMS Dispatch

EMS Dispatch frequencies for Wilson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wilson County EMSCounty 911 Dispatch453.4500
In 458.4500
156.7 PLFMNWNWI718

Nearest trunked radio sites

Distances are measured from the center of Webster.

Buffalo · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 3 (hex 3) · NAC 1B0 · about 12 mi away
Control 852.4625, 852.725
Voice 851.8375, 852.975, 853.4, 853.8625
Virgil · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 9 (hex 9) · NAC 1BC · about 25 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
Severy · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 1 (hex 1) · NAC 1B6 · about 25 mi away
Control 851.55, 852.3375
Voice 851.275, 853.175, 853.35, 853.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Webster?

We do not have a fire dispatch channel listed specifically for Webster. The county-level fire dispatch channels in the same county: Wilson County Fire 453.0250 MHz, narrow FM, 107.2 PL.

What frequency does EMS or the ambulance service use in Webster?

We do not have a EMS dispatch channel listed specifically for Webster. The county-level EMS dispatch channels in the same county: Wilson County EMS 453.4500 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Webster?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Webster?

For Webster, start with the Buffalo site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4625, 852.725 MHz. Program a control channel first; the scanner finds the voice channels from it.