About Perry Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Perry: Woodson County Fire 453.8125 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Woodson County Fire talkgroup 2806 (hex af6).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Perry, start with the Buffalo site of Kansas Statewide Interoperable Communication System (KSICS), about 6 miles away. Its control channels: 852.4625, 852.725 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Woodson County channels that also cover Perry
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Woodson County Fire | Fire and EMS Dispatch | 453.3750 In 458.3750 | 243 DPL | FMN Encrypted | WPVK730 |
| Woodson County Fire | County Fire and EMS Operations – West | 453.8125 In 458.8125 | FMN | WPVK730 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Woodson County Fire | Toronto Fire Tactical | 458.4875 | FMN | WRHX493 | |
| Woodson County Fire | Toronto Fire Tactical | 458.7625 | FMN | WRHX493 | |
| Woodson County Fire | County Fire and EMS Operations – East | 460.2375 In 465.2375 | FMN | WPVK730 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Woodson County Fire | County Fire | 2806 | af6 | D |
| Woodson County EMS | Woodson County EMS – Dispatch | 2807 | af7 | D |
Nearest trunked radio sites
Distances are measured from the center of Perry.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Perry?
We do not have a fire dispatch channel listed specifically for Perry. The county-level fire dispatch channels in the same county: Woodson County Fire 453.8125 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Perry?
Yes. The county-level systems that cover Perry are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Perry?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Perry?
For Perry, start with the Buffalo site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4625, 852.725 MHz. Program a control channel first; the scanner finds the voice channels from it.