Skip to content

Piqua Fire and EMS Frequencies

We do not have frequencies listed specifically for Piqua in Woodson County, Kansas yet. Countywide channels for Woodson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Buffalo (Kansas Statewide Interoperable Communication System (KSICS)), about 16 miles away.

About Piqua Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Piqua: Woodson County Fire 453.8125 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Woodson County Fire talkgroup 2806 (hex af6).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Piqua, start with the Buffalo site of Kansas Statewide Interoperable Communication System (KSICS), about 16 miles away. Its control channels: 852.4625, 852.725 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Woodson County channels that also cover Piqua

Fire Dispatch

Fire Dispatch frequencies for Woodson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Woodson County FireFire and EMS Dispatch453.3750
In 458.3750
243 DPLFMN EncryptedWPVK730
Woodson County FireCounty Fire and EMS Operations – West453.8125
In 458.8125
FMNWPVK730

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Woodson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Woodson County FireToronto Fire Tactical458.4875FMNWRHX493
Woodson County FireToronto Fire Tactical458.7625FMNWRHX493
Woodson County FireCounty Fire and EMS Operations – East460.2375
In 465.2375
FMNWPVK730

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Woodson County FireCounty Fire2806af6D
Woodson County EMSWoodson County EMS – Dispatch2807af7D

Nearest trunked radio sites

Distances are measured from the center of Piqua.

Buffalo · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 3 (hex 3) · NAC 1B0 · about 16 mi away
Control 852.4625, 852.725
Voice 851.8375, 852.975, 853.4, 853.8625
Burlington · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 39 (hex 27) · NAC 1B1 · about 21 mi away
Control 852.35, 852.5625
Voice 851.0875, 852.7875, 853.275, 853.5375
Garnett · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 66 (hex 42) · NAC 1B0 · about 27 mi away
Control 854.4125, 854.6625
Voice 854.1625, 856.4375, 857.0375, 857.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Piqua?

We do not have a fire dispatch channel listed specifically for Piqua. The county-level fire dispatch channels in the same county: Woodson County Fire 453.8125 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Piqua?

Yes. The county-level systems that cover Piqua are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Piqua?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Piqua?

For Piqua, start with the Buffalo site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4625, 852.725 MHz. Program a control channel first; the scanner finds the voice channels from it.