Skip to content

Bandana Fire and EMS Frequencies

We do not have frequencies listed specifically for Bandana in Ballard County, Kentucky yet. Countywide channels for Ballard County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Wickliffe (KY SERVS), about 7 miles away.

About Bandana Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bandana: Ballard County Fire Dispatch 154.0250 MHz, narrow FM, 123.0 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Ballard County channels that also cover Bandana

Fire Dispatch

Fire Dispatch frequencies for Ballard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ballard County Fire DispatchBallard County Fire Dispatch154.0250
In 151.0100
123.0 PLFMNKNDZ310

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Ballard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bandana Fireground FireBandana Fireground154.3100127.3 PLFMNWNLF466
Kevil Fireground FireKevil Fireground154.4300123.0 PLFMNKNCZ224

EMS Talk-around

EMS Talk-around frequencies for Ballard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ballard County EMSBallard County EMS155.1600123.0 PLFMNWPKH301
Ballard County EMSBallard County EMS155.3400FMN—
Ballard County EMSBallard County EMS155.7675
In 159.0825
NAC 295P25WQAU444

Nearest trunked radio sites

Distances are measured from the center of Bandana.

Wickliffe · KY SERVS
RFSS 3 · Site 106 (hex 6A) · NAC 9C6 · about 7 mi away
Control 771.33125, 772.00625, 772.65625, 773.40625
Voice 769.35625, 770.76875
Paducah · KY SERVS
RFSS 3 · Site 105 (hex 69) · NAC 9C5 · about 13 mi away
Control 769.85625, 770.10625, 770.60625, 771.18125
Voice 769.30625, 769.60625
Paducah · Paducah/McCracken County P-25
RFSS 1 · Site 1 (hex 1) · NAC BB2 · about 13 mi away
Control 854.7125, 855.9875, 856.7375, 857.2625, 857.7375, 858.2375, 858.2625, 858.7375, 859.2375, 859.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bandana?

We do not have a fire dispatch channel listed specifically for Bandana. The county-level fire dispatch channels in the same county: Ballard County Fire Dispatch 154.0250 MHz, narrow FM, 123.0 PL.

What scanner do I need to listen to fire and EMS in Bandana?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Bandana?

For Bandana, start with the Wickliffe site of KY SERVS. Its control channels are 771.33125, 772.00625, 772.65625, 773.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.