Skip to content

Farmers Fire and EMS Frequencies

We do not have frequencies listed specifically for Farmers in Rowan County, Kentucky yet. Countywide channels for Rowan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Courthouse (Bath County Emergency Communications Network), about 11 miles away.

About Farmers Fire and EMS Frequencies

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Rowan County channels that also cover Farmers

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Rowan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMARowan Co. Rescue Squad462.9750
In 467.9750
325 DPLFMNWNAZ403

Fire Talk-around

Fire Talk-around frequencies for Rowan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMARoute 377 Volunteer Fire Department (1100 unit's)453.8750FMWQML795
Fire/EMAHayes Crossing – Haldeman Fire Department (Volunteer Fire Department)460.2000
In 465.2000
FMWQSZ781

Hospitals & Medical

Hospitals & Medical frequencies for Rowan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
St Claire Medical CenterEMS to St Claire155.2800FMKKL850
St Claire Medical CenterEMS to St Claire155.3400192.8 PLFMKKL850
St Claire Medical CenterSt Claire Medical Center – Paging163.2500FMKKL850
St Claire Medical CenterMaintenance462.2500
In 467.2500
025 DPLFMWPNU742
St Claire Medical CenterMaintenance467.7625025 DPLFMWPNU742
St Claire Medical CenterMaintenance467.9250025 DPLFMWPNU742

Nearest trunked radio sites

Distances are measured from the center of Farmers.

Courthouse · Bath County Emergency Communications Network
RFSS 7 · Site 7 (hex 7) · NAC 064 · about 11 mi away
Control 453.475
Voice 453.1875, 453.75, 460.1375, 460.55
Sharpsburg · Bath County Emergency Communications Network
RFSS 6 · Site 6 (hex 6) · NAC 064 · about 11 mi away
Control 453.925
Voice 453.2625, 453.675, 460.075, 460.625
Preston · Bath County Emergency Communications Network
RFSS 3 · Site 3 (hex 3) · NAC 064 · about 11 mi away
Control 453.2, 460.125
Voice 453.05, 453.425, 453.7, 460.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What scanner do I need to listen to fire and EMS in Farmers?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Farmers?

For Farmers, start with the Courthouse site of Bath County Emergency Communications Network. Its control channels are 453.475 MHz. Program a control channel first; the scanner finds the voice channels from it.