Skip to content

Grand Island Fire and EMS Frequencies

We do not have frequencies listed specifically for Grand Island in Alger County, Michigan yet. Countywide channels for Alger County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Munising (Michigan's Public Safety Communications System (MPSCS)), about 7 miles away.

About Grand Island Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Grand Island: Alger County Fire 154.1000 MHz, narrow FM, 100.0 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Alger County Fire talkgroup 5055 (hex 13bf).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Grand Island, start with the Munising site of Michigan's Public Safety Communications System (MPSCS), about 7 miles away. Its control channels: 852.8875, 853.375 MHz.

Data updated .

Alger County channels that also cover Grand Island

Fire Dispatch

Fire Dispatch frequencies for Alger County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alger County FireCountywide Fire Repeater154.1000
In 156.0150
100.0 PLFMNKNDZ232

Fire Talk-around

Fire Talk-around frequencies for Alger County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alger County FireTri-County Fire Talkaround151.9550FMN—

Hospitals & Medical

Hospitals & Medical frequencies for Alger County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Munising Memorial HospitalAmbulance-to-Hospital Comms155.3400FMNKNGP470
Munising Memorial HospitalMunising Memorial Hospital – Paging157.4500FMNKNGP470

Michigan's Public Safety Communications System (MPSCS)

Michigan's Public Safety Communications System (MPSCS) talkgroups
AgencyDescriptionTalkgroupHexMode
Alger County FireFire-EMS Dispatch505513bfD
Alger County FireIndian Lake First Responders Page234365b8cD
Alger County HospitalCounty EMS to Hospital505613c0D
Alger County HospitalCounty EMS to Hospital505813c2D
Alger County HospitalCounty EMS to Hospital505913c3D

Nearest trunked radio sites

Distances are measured from the center of Grand Island.

Munising · Michigan's Public Safety Communications System (MPSCS)
RFSS 5 · Site 24 (hex 18) · NAC 79B · about 7 mi away
Control 852.8875, 853.375
Voice 851.475, 852.3625, 852.7125
Melstrand · Michigan's Public Safety Communications System (MPSCS)
RFSS 5 · Site 25 (hex 19) · NAC 799 · about 14 mi away
Control 852.9625, 853.95
Voice 851.9875, 852.475
Sundel · Michigan's Public Safety Communications System (MPSCS)
RFSS 5 · Site 23 (hex 17) · NAC 79A · about 23 mi away
Control 853.3875, 853.825
Voice 851.2875, 851.4875, 851.9625, 852.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Grand Island?

We do not have a fire dispatch channel listed specifically for Grand Island. The county-level fire dispatch channels in the same county: Alger County Fire 154.1000 MHz, narrow FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in Grand Island?

Yes. The county-level systems that cover Grand Island are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Grand Island?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Grand Island?

For Grand Island, start with the Munising site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 852.8875, 853.375 MHz. Program a control channel first; the scanner finds the voice channels from it.