Skip to content

Blaine Fire and EMS Frequencies

We do not have frequencies listed specifically for Blaine in Benzie County, Michigan yet. Countywide channels for Benzie County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Frankfort (Michigan's Public Safety Communications System (MPSCS)), about 6 miles away.

About Blaine Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Blaine: Benzie County Fire 154.9200 MHz, narrow FM, 136.5 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Benzie County Fire/EMS talkgroup 4335 (hex 10ef).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 19 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Blaine, start with the Frankfort site of Michigan's Public Safety Communications System (MPSCS), about 6 miles away. Its control channels: 853.05 MHz.

Data updated .

Benzie County channels that also cover Blaine

Fire Dispatch

Fire Dispatch frequencies for Benzie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Benzie County FireFire/Rescue Dispatch154.9200136.5 PLFMNWQBT846

Hospitals & Medical

Hospitals & Medical frequencies for Benzie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Munson Medical Center (Frankfort)Ambulance-to-Hospital Comms155.3400FMNWPPX840

Michigan's Public Safety Communications System (MPSCS)

Michigan's Public Safety Communications System (MPSCS) talkgroups
AgencyDescriptionTalkgroupHexMode
Benzie County Fire/EMSFire/EMS Dispatch433510efD
Benzie County Fire/EMSFire and Rescue Page4972136cD
Benzie County Fire/EMSStation 4 Paging141023716D
Benzie County Fire/EMSStation 5 Paging141033717D
Benzie County Fire/EMSStation 6 Paging141043718D
Benzie County Fire/EMSStation 7 Paging141053719D
Benzie County Fire/EMSStation 1 Paging14106371aD
Benzie County Fire/EMSStation 9 Paging14108371cD
Benzie County Fire/EMSCountywide Fire/EMS Operations5535159fD
Benzie County Fire/EMSCountywide Fire/EMS Operations553615a0D
Benzie County Fire/EMSCountywide Fire/EMS Operations553715a1D
Benzie County Fire/EMSStation 4/EMS Paging555815b6D
Benzie County Fire/EMSStation 5/EMS Paging555915b7D
Benzie County Fire/EMSStation 6/EMS Paging556015b8D
Benzie County Fire/EMSStation 9/EMS Paging556415bcD
Benzie County Fire/EMSBenzie EMS Paging14109371dD
Benzie County Fire/EMSEMS Common/Tactical5534159eD
Benzie County Fire/EMSHealth Department4236108cD
Benzie County Fire/EMSPaul Oliver Memorial E.R.42301086D

Nearest trunked radio sites

Distances are measured from the center of Blaine.

Frankfort · Michigan's Public Safety Communications System (MPSCS)
RFSS 4 · Site 53 (hex 35) · about 6 mi away
Control 853.05
Voice 851.1625, 851.6, 851.85
Bear Lake · Michigan's Public Safety Communications System (MPSCS)
RFSS 4 · Site 25 (hex 19) · NAC 791 · about 7 mi away
Control 852.9625, 853.95
Voice 851.225, 851.9875, 852.475, 856.8375
Honor · Michigan's Public Safety Communications System (MPSCS)
RFSS 4 · Site 30 (hex 1E) · NAC 796 · about 10 mi away
Control 853.4625, 853.9625
Voice 851.2, 851.4625, 852.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Blaine?

We do not have a fire dispatch channel listed specifically for Blaine. The county-level fire dispatch channels in the same county: Benzie County Fire 154.9200 MHz, narrow FM, 136.5 PL.

Do fire departments and EMS use a trunked radio system in Blaine?

Yes. The county-level systems that cover Blaine are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 19 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Blaine?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Blaine?

For Blaine, start with the Frankfort site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.05 MHz. Program a control channel first; the scanner finds the voice channels from it.