About Gilmore Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Gilmore: Benzie County Fire 154.9200 MHz, narrow FM, 136.5 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Benzie County Fire/EMS talkgroup 4335 (hex 10ef).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 19 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Gilmore, start with the Frankfort site of Michigan's Public Safety Communications System (MPSCS), about 3 miles away. Its control channels: 853.05 MHz.
Data updated .
Benzie County channels that also cover Gilmore
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Benzie County Fire | Fire/Rescue Dispatch | 154.9200 | 136.5 PL | FMN | WQBT846 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Munson Medical Center (Frankfort) | Ambulance-to-Hospital Comms | 155.3400 | FMN | WPPX840 |
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Benzie County Fire/EMS | Fire/EMS Dispatch | 4335 | 10ef | D |
| Benzie County Fire/EMS | Fire and Rescue Page | 4972 | 136c | D |
| Benzie County Fire/EMS | Station 4 Paging | 14102 | 3716 | D |
| Benzie County Fire/EMS | Station 5 Paging | 14103 | 3717 | D |
| Benzie County Fire/EMS | Station 6 Paging | 14104 | 3718 | D |
| Benzie County Fire/EMS | Station 7 Paging | 14105 | 3719 | D |
| Benzie County Fire/EMS | Station 1 Paging | 14106 | 371a | D |
| Benzie County Fire/EMS | Station 9 Paging | 14108 | 371c | D |
| Benzie County Fire/EMS | Countywide Fire/EMS Operations | 5535 | 159f | D |
| Benzie County Fire/EMS | Countywide Fire/EMS Operations | 5536 | 15a0 | D |
| Benzie County Fire/EMS | Countywide Fire/EMS Operations | 5537 | 15a1 | D |
| Benzie County Fire/EMS | Station 4/EMS Paging | 5558 | 15b6 | D |
| Benzie County Fire/EMS | Station 5/EMS Paging | 5559 | 15b7 | D |
| Benzie County Fire/EMS | Station 6/EMS Paging | 5560 | 15b8 | D |
| Benzie County Fire/EMS | Station 9/EMS Paging | 5564 | 15bc | D |
| Benzie County Fire/EMS | Benzie EMS Paging | 14109 | 371d | D |
| Benzie County Fire/EMS | EMS Common/Tactical | 5534 | 159e | D |
| Benzie County Fire/EMS | Health Department | 4236 | 108c | D |
| Benzie County Fire/EMS | Paul Oliver Memorial E.R. | 4230 | 1086 | D |
Nearest trunked radio sites
Distances are measured from the center of Gilmore.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Gilmore?
We do not have a fire dispatch channel listed specifically for Gilmore. The county-level fire dispatch channels in the same county: Benzie County Fire 154.9200 MHz, narrow FM, 136.5 PL.
Do fire departments and EMS use a trunked radio system in Gilmore?
Yes. The county-level systems that cover Gilmore are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 19 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Gilmore?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Gilmore?
For Gilmore, start with the Frankfort site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.05 MHz. Program a control channel first; the scanner finds the voice channels from it.