Skip to content

Ball Bluff Fire and EMS Frequencies

We do not have frequencies listed specifically for Ball Bluff in Aitkin County, Minnesota yet. Countywide channels for Aitkin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is McGregor (Allied Radio Matrix for Emergency Response (ARMER)), about 10 miles away.

About Ball Bluff Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Ball Bluff: Aitkin County Fire 154.4450 MHz, narrow FM, 141.3 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Aitkin County Fire talkgroup 36919 (hex 9037).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ball Bluff, start with the McGregor site of Allied Radio Matrix for Emergency Response (ARMER), about 10 miles away. Its control channels: 851.9, 852.9125 MHz.

Data updated .

Aitkin County channels that also cover Ball Bluff

Fire Dispatch

Fire Dispatch frequencies for Aitkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Aitkin County FireCounty Fire / Rescue Paging154.4450141.3 PLFMNWQF590

Hospitals & Medical

Hospitals & Medical frequencies for Aitkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Aitkin County HospitalRiverwood Health Care Center155.3550167.9 PLFMNWQCA908

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Aitkin County FireAitkin City Fire Tactical369199037D
Aitkin County HospitalRiverwood Hospital ER Aitkin36925903dD

Nearest trunked radio sites

Distances are measured from the center of Ball Bluff.

McGregor · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 9 (hex 9) · NAC 40B · about 10 mi away
Control 851.9, 852.9125
Voice 852.4, 858.2375, 858.9625
Floodwood · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 30 (hex 1E) · NAC 40C · about 16 mi away
Control 858.4375, 859.2625
Voice 853.4125, 855.4625, 857.2625
Hill City · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 13 (hex D) · NAC 409 · about 16 mi away
Control 856.2375, 857.9375
Voice 852.875, 857.4625, 859.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ball Bluff?

We do not have a fire dispatch channel listed specifically for Ball Bluff. The county-level fire dispatch channels in the same county: Aitkin County Fire 154.4450 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Ball Bluff?

Yes. The county-level systems that cover Ball Bluff are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ball Bluff?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ball Bluff?

For Ball Bluff, start with the McGregor site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.9, 852.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.