Skip to content

Aitkin County Fire and EMS Frequencies

Aitkin County in Minnesota has 2 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 44 cities and communities below for local fire departments and EMS agencies.

About Aitkin County Fire and EMS Frequencies

Quick answer: Fire dispatch for Aitkin County: Aitkin County Fire 154.4450 MHz, narrow FM, 141.3 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Aitkin County Fire talkgroup 36919 (hex 9037).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Aitkin County, start with the Logan site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 853.45, 856.7625 MHz.

Data updated .

Aitkin County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Aitkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Aitkin County FireCounty Fire / Rescue Paging154.4450141.3 PLFMNWQF590

Hospitals & Medical

Hospitals & Medical frequencies for Aitkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Aitkin County HospitalRiverwood Health Care Center155.3550167.9 PLFMNWQCA908

Aitkin County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Aitkin County FireAitkin City Fire Tactical369199037D
Aitkin County HospitalRiverwood Hospital ER Aitkin36925903dD

Radio system sites in Aitkin County

Program the control channel first; your scanner finds the voice channels from it.

Logan · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 6 (hex 6) · NAC 40A
Control 853.45, 856.7625
Voice 851.4, 852.4375, 852.9375
Glen · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 7 (hex 7) · NAC 408
Control 851.45, 859.7375
Voice 853.5, 857.4375, 857.7375
Lawler · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 8 (hex 8) · NAC 406
Control 853.9125, 855.2375
Voice 851.9375, 852.8875, 853.3875
McGregor · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 9 (hex 9) · NAC 40B
Control 851.9, 852.9125
Voice 852.4, 858.2375, 858.9625
McGrath · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 10 (hex A) · NAC 405
Control 856.4875, 857.9625
Voice 851.9125, 852.4125, 854.9875
Hill City · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 13 (hex D) · NAC 409
Control 856.2375, 857.9375
Voice 852.875, 857.4625, 859.2375
Aitkin · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 47 (hex 2F) · NAC 407
Control 851.7875, 854.3625
Voice 851.175, 851.5375, 853.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Aitkin County

Common questions

What frequency does the fire department use in Aitkin County?

Fire dispatch channels listed for Aitkin County: Aitkin County Fire 154.4450 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Aitkin County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Aitkin County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Aitkin County?

For Aitkin County, start with the Logan site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 853.45, 856.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Aitkin County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Aitkin County are marked encrypted.

Are Aitkin County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Aitkin County are marked encrypted.