Skip to content

Hill City Fire and EMS Frequencies

Hill City in Aitkin County, Minnesota has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Hill City (Allied Radio Matrix for Emergency Response (ARMER)), about 2 miles away.

About Hill City Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hill City: Aitkin County Fire 154.4450 MHz, narrow FM, 141.3 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Hill City Fire talkgroup 36920 (hex 9038).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hill City, start with the Hill City site of Allied Radio Matrix for Emergency Response (ARMER), about 2 miles away. Its control channels: 856.2375, 857.9375 MHz.

Data updated .

Hill City trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Hill City FireHill City Fire Tactical369209038D

Aitkin County channels that also cover Hill City

Fire Dispatch

Fire Dispatch frequencies for Aitkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Aitkin County FireCounty Fire / Rescue Paging154.4450141.3 PLFMNWQF590

Hospitals & Medical

Hospitals & Medical frequencies for Aitkin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Aitkin County HospitalRiverwood Health Care Center155.3550167.9 PLFMNWQCA908

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Aitkin County FireAitkin City Fire Tactical369199037D
Aitkin County HospitalRiverwood Hospital ER Aitkin36925903dD

Nearest trunked radio sites

Distances are measured from the center of Hill City.

Hill City · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 13 (hex D) · NAC 409 · about 2 mi away
Control 856.2375, 857.9375
Voice 852.875, 857.4625, 859.2375
Remer · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 5 (hex 5) · NAC 408 · about 16 mi away
Control 856.4375, 858.7375
Voice 851.3, 851.875, 852.1125, 856.9875, 858.2125
McGregor · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 9 (hex 9) · NAC 40B · about 19 mi away
Control 851.9, 852.9125
Voice 852.4, 858.2375, 858.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hill City?

We do not have a fire dispatch channel listed specifically for Hill City. The county-level fire dispatch channels in the same county: Aitkin County Fire 154.4450 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Hill City?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Hill City?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Hill City?

For Hill City, start with the Hill City site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 856.2375, 857.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hill City fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Hill City are marked encrypted.