About Malmo Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Malmo: Aitkin County Fire 154.4450 MHz, narrow FM, 141.3 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Aitkin County Fire talkgroup 36919 (hex 9037).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Malmo, start with the Glen site of Allied Radio Matrix for Emergency Response (ARMER), about 6 miles away. Its control channels: 851.45, 859.7375 MHz.
Data updated .
Aitkin County channels that also cover Malmo
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Aitkin County Fire | County Fire / Rescue Paging | 154.4450 | 141.3 PL | FMN | WQF590 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Aitkin County Hospital | Riverwood Health Care Center | 155.3550 | 167.9 PL | FMN | WQCA908 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Aitkin County Fire | Aitkin City Fire Tactical | 36919 | 9037 | D |
| Aitkin County Hospital | Riverwood Hospital ER Aitkin | 36925 | 903d | D |
Nearest trunked radio sites
Distances are measured from the center of Malmo.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Malmo?
We do not have a fire dispatch channel listed specifically for Malmo. The county-level fire dispatch channels in the same county: Aitkin County Fire 154.4450 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Malmo?
Yes. The county-level systems that cover Malmo are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Malmo?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Malmo?
For Malmo, start with the Glen site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.45, 859.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.