Skip to content

Rice Fire and EMS Frequencies

Rice in Benton County, Minnesota has 0 conventional frequencies and 2 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Holdingford (Allied Radio Matrix for Emergency Response (ARMER)), about 7 miles away.

About Rice Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Rice: Benton County Fire 154.0400 MHz, narrow FM, 146.2 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Rice Fire talkgroup 24938 (hex 616a).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups; Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Rice, start with the Holdingford site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 854.6875, 856.8875 MHz.

Data updated .

Rice trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Rice FireRice Fire Department (1)24938616aD
Rice FireRice Fire Department (2)24940616cD

Benton County channels that also cover Rice

Fire Dispatch

Fire Dispatch frequencies for Benton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Benton County FireRice Fire Department154.0400
In 158.9400
146.2 PLFMNKNJH312
Benton County FireFoley Fire Department154.2500146.2 PLFMNWPJI508
Benton County FireSauk Rapids 911 – Paging155.1000
In 159.8250
146.2 PLFMNKR9809

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Benton County FireCounty Fire249466172D

Nearest trunked radio sites

Distances are measured from the center of Rice.

Holdingford · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 79 (hex 4F) · NAC 401 · about 7 mi away
Control 854.6875, 856.8875
Voice 856.0875, 857.8875, 858.8875, 859.5875
St. Cloud Region Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 41 (hex 29) · NAC 405 · about 12 mi away
Control 856.9875, 857.4375, 857.9875, 859.0875
Voice 851.95, 852.3, 852.925, 853.9, 854.9875, 855.4625, 856.1375, 856.4375, 858.6625, 859.4625
Avon · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 21 (hex 15) · NAC 401 · about 15 mi away
Control 851.625, 852.05, 853.275
Voice 851.225, 853.65, 856.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Rice?

We do not have a fire dispatch channel listed specifically for Rice. The county-level fire dispatch channels in the same county: Benton County Fire 154.0400 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Rice?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Rice?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Rice?

For Rice, start with the Holdingford site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.6875, 856.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Rice fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Rice are marked encrypted.