About Benton County Fire and EMS Frequencies
Quick answer: Fire dispatch for Benton County: Benton County Fire 154.0400 MHz, narrow FM, 146.2 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Benton County Fire talkgroup 24946 (hex 6172).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Benton County, start with the Gilman - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 852.4, 852.725 MHz.
Data updated .
Benton County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Benton County Fire | Rice Fire Department | 154.0400 In 158.9400 | 146.2 PL | FMN | KNJH312 |
| Benton County Fire | Foley Fire Department | 154.2500 | 146.2 PL | FMN | WPJI508 |
| Benton County Fire | Sauk Rapids 911 – Paging | 155.1000 In 159.8250 | 146.2 PL | FMN | KR9809 |
Benton County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Benton County Fire | County Fire | 24946 | 6172 | D |
Radio system sites in Benton County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Benton County
Common questions
What frequency does the fire department use in Benton County?
Fire dispatch channels listed for Benton County: Benton County Fire 154.0400 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Benton County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Benton County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Benton County?
For Benton County, start with the Gilman - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.4, 852.725 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Benton County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Benton County are marked encrypted.
Are Benton County fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Benton County are marked encrypted.