About Akron Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Akron: Big Stone County Fire 154.0550 MHz, narrow FM, 110.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Big Stone County Fire talkgroup 26509 (hex 678d).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Akron, start with the Correll site of Allied Radio Matrix for Emergency Response (ARMER), about 2 miles away. Its control channels: 852.9875, 853.4 MHz.
Data updated .
Big Stone County channels that also cover Akron
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Big Stone County Fire | Ortonville EMS – Fire Paging | 154.0550 In 159.1200 | 110.9 PL | FMN | WNHB841 |
| Big Stone County Fire | Big Stone County Fire – Paging | 154.4450 In 153.7700 | 179.9 PL | FMN | WNLG684 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Big Stone County Hospital | Holy Trinity Hospital Graceville | 155.4000 | 71.9 PL | FMN | KNDH884 |
| Big Stone County Hospital | Ortonville Area Health System | 155.4000 | 103.5 PL | FMN | KNEC932 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Big Stone County Fire | Big Stone Paging | 26509 | 678d | D |
Nearest trunked radio sites
Distances are measured from the center of Akron.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Akron?
We do not have a fire dispatch channel listed specifically for Akron. The county-level fire dispatch channels in the same county: Big Stone County Fire 154.0550 MHz, narrow FM, 110.9 PL.
Do fire departments and EMS use a trunked radio system in Akron?
Yes. The county-level systems that cover Akron are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Akron?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Akron?
For Akron, start with the Correll site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.9875, 853.4 MHz. Program a control channel first; the scanner finds the voice channels from it.