Skip to content

Big Stone County Fire and EMS Frequencies

Big Stone County in Minnesota has 4 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 19 cities and communities below for local fire departments and EMS agencies.

About Big Stone County Fire and EMS Frequencies

Quick answer: Fire dispatch for Big Stone County: Big Stone County Fire 154.0550 MHz, narrow FM, 110.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Big Stone County Fire talkgroup 26509 (hex 678d).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Big Stone County, start with the Johnson site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 854.9625, 856.7375 MHz.

Data updated .

Big Stone County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Big Stone County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Big Stone County FireOrtonville EMS – Fire Paging154.0550
In 159.1200
110.9 PLFMNWNHB841
Big Stone County FireBig Stone County Fire – Paging154.4450
In 153.7700
179.9 PLFMNWNLG684

Hospitals & Medical

Hospitals & Medical frequencies for Big Stone County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Big Stone County HospitalHoly Trinity Hospital Graceville155.400071.9 PLFMNKNDH884
Big Stone County HospitalOrtonville Area Health System155.4000103.5 PLFMNKNEC932

Big Stone County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Big Stone County FireBig Stone Paging26509678dD

Radio system sites in Big Stone County

Program the control channel first; your scanner finds the voice channels from it.

Johnson · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 26 (hex 1A) · NAC 406
Control 854.9625, 856.7375
Voice 857.7375, 858.7375, 859.7375, 860.7375
Correll · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 28 (hex 1C) · NAC 40F
Control 852.9875, 853.4
Voice 851.475, 851.75, 851.9
Ortonville · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 86 (hex 56) · NAC 405
Control 858.4875, 859.4875
Voice 856.4875, 857.4875, 860.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Big Stone County

Common questions

What frequency does the fire department use in Big Stone County?

Fire dispatch channels listed for Big Stone County: Big Stone County Fire 154.0550 MHz, narrow FM, 110.9 PL.

Do fire departments and EMS use a trunked radio system in Big Stone County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Big Stone County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Big Stone County?

For Big Stone County, start with the Johnson site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.9625, 856.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Big Stone County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Big Stone County are marked encrypted.

Are Big Stone County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Big Stone County are marked encrypted.