Skip to content

Moonshine Fire and EMS Frequencies

We do not have frequencies listed specifically for Moonshine in Big Stone County, Minnesota yet. Countywide channels for Big Stone County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Johnson (Allied Radio Matrix for Emergency Response (ARMER)), about 1 miles away.

About Moonshine Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Moonshine: Big Stone County Fire 154.0550 MHz, narrow FM, 110.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Big Stone County Fire talkgroup 26509 (hex 678d).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Moonshine, start with the Johnson site of Allied Radio Matrix for Emergency Response (ARMER), about 1 miles away. Its control channels: 854.9625, 856.7375 MHz.

Data updated .

Big Stone County channels that also cover Moonshine

Fire Dispatch

Fire Dispatch frequencies for Big Stone County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Big Stone County FireOrtonville EMS – Fire Paging154.0550
In 159.1200
110.9 PLFMNWNHB841
Big Stone County FireBig Stone County Fire – Paging154.4450
In 153.7700
179.9 PLFMNWNLG684

Hospitals & Medical

Hospitals & Medical frequencies for Big Stone County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Big Stone County HospitalHoly Trinity Hospital Graceville155.400071.9 PLFMNKNDH884
Big Stone County HospitalOrtonville Area Health System155.4000103.5 PLFMNKNEC932

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Big Stone County FireBig Stone Paging26509678dD

Nearest trunked radio sites

Distances are measured from the center of Moonshine.

Johnson · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 26 (hex 1A) · NAC 406 · about 1 mi away
Control 854.9625, 856.7375
Voice 857.7375, 858.7375, 859.7375, 860.7375
Ortonville · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 86 (hex 56) · NAC 405 · about 13 mi away
Control 858.4875, 859.4875
Voice 856.4875, 857.4875, 860.4875
Dumont · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 78 (hex 4E) · NAC 403 · about 16 mi away
Control 851.45, 851.875
Voice 853.45, 858.9625, 859.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Moonshine?

We do not have a fire dispatch channel listed specifically for Moonshine. The county-level fire dispatch channels in the same county: Big Stone County Fire 154.0550 MHz, narrow FM, 110.9 PL.

Do fire departments and EMS use a trunked radio system in Moonshine?

Yes. The county-level systems that cover Moonshine are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Moonshine?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Moonshine?

For Moonshine, start with the Johnson site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.9625, 856.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.