Skip to content

Baker Fire and EMS Frequencies

We do not have frequencies listed specifically for Baker in Stevens County, Minnesota yet. Countywide channels for Stevens County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Johnson (Allied Radio Matrix for Emergency Response (ARMER)), about 8 miles away.

About Baker Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Baker: Stevens County Fire 155.7600 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Baker: Stevens County EMS 154.1150 MHz, narrow FM, 173.8 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Stevens County Fire talkgroup 26332 (hex 66dc).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Baker, start with the Johnson site of Allied Radio Matrix for Emergency Response (ARMER), about 8 miles away. Its control channels: 854.9625, 856.7375 MHz.

Data updated .

Stevens County channels that also cover Baker

Fire Dispatch

Fire Dispatch frequencies for Stevens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stevens County FireStevens County Fire – Paging155.7600123.0 PLFMNKDR727

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Stevens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stevens County FireCounty Fire154.3700127.3 PLFMNWNJP947

EMS Dispatch

EMS Dispatch frequencies for Stevens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stevens County EMSEMS Paging154.1150
In 159.4500
173.8 PLFMNWPLZ657

EMS Talk-around

EMS Talk-around frequencies for Stevens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stevens County EMSFirst Responders – Armer LINK853.0125
In 808.0125
FMWQWT815

Hospitals & Medical

Hospitals & Medical frequencies for Stevens County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stevens County HospitalStevens Community Medical Center155.3550136.5 PLFMNKWM800

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Stevens County FireFire Paging – 155.760 VHF2633266dcD
Stevens County FireStevens County Fire – Dispatch2633866e2D
Stevens County EMSStevens County EMS – Dispatch – 154.115 VHF2634966edD

Nearest trunked radio sites

Distances are measured from the center of Baker.

Johnson · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 26 (hex 1A) · NAC 406 · about 8 mi away
Control 854.9625, 856.7375
Voice 857.7375, 858.7375, 859.7375, 860.7375
Morris · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 14 (hex E) · NAC 40E · about 13 mi away
Control 851.4375, 855.2375
Voice 851.9375, 852.4375, 852.9375, 853.4375
Correll · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 28 (hex 1C) · NAC 40F · about 16 mi away
Control 852.9875, 853.4
Voice 851.475, 851.75, 851.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Baker?

We do not have a fire dispatch channel listed specifically for Baker. The county-level fire dispatch channels in the same county: Stevens County Fire 155.7600 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Baker?

We do not have a EMS dispatch channel listed specifically for Baker. The county-level EMS dispatch channels in the same county: Stevens County EMS 154.1150 MHz, narrow FM, 173.8 PL.

Do fire departments and EMS use a trunked radio system in Baker?

Yes. The county-level systems that cover Baker are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Baker?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Baker?

For Baker, start with the Johnson site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.9625, 856.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.