About Scott Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Scott: Stevens County Fire 155.7600 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Scott: Stevens County EMS 154.1150 MHz, narrow FM, 173.8 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Stevens County Fire talkgroup 26332 (hex 66dc).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Scott, start with the Morris site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 851.4375, 855.2375 MHz.
Data updated .
Stevens County channels that also cover Scott
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Stevens County Fire | Stevens County Fire – Paging | 155.7600 | 123.0 PL | FMN | KDR727 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Stevens County Fire | County Fire | 154.3700 | 127.3 PL | FMN | WNJP947 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Stevens County EMS | EMS Paging | 154.1150 In 159.4500 | 173.8 PL | FMN | WPLZ657 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Stevens County EMS | First Responders – Armer LINK | 853.0125 In 808.0125 | FM | WQWT815 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Stevens County Hospital | Stevens Community Medical Center | 155.3550 | 136.5 PL | FMN | KWM800 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Stevens County Fire | Fire Paging – 155.760 VHF | 26332 | 66dc | D |
| Stevens County Fire | Stevens County Fire – Dispatch | 26338 | 66e2 | D |
| Stevens County EMS | Stevens County EMS – Dispatch – 154.115 VHF | 26349 | 66ed | D |
Nearest trunked radio sites
Distances are measured from the center of Scott.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Scott?
We do not have a fire dispatch channel listed specifically for Scott. The county-level fire dispatch channels in the same county: Stevens County Fire 155.7600 MHz, narrow FM, 123.0 PL.
What frequency does EMS or the ambulance service use in Scott?
We do not have a EMS dispatch channel listed specifically for Scott. The county-level EMS dispatch channels in the same county: Stevens County EMS 154.1150 MHz, narrow FM, 173.8 PL.
Do fire departments and EMS use a trunked radio system in Scott?
Yes. The county-level systems that cover Scott are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Scott?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Scott?
For Scott, start with the Morris site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.4375, 855.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.