Skip to content

New Ulm Fire and EMS Frequencies

New Ulm in Brown County, Minnesota has 1 conventional frequency and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is New Ulm (Allied Radio Matrix for Emergency Response (ARMER)), about 3 miles away.

About New Ulm Fire and EMS Frequencies

Quick answer: Fire dispatch for New Ulm: New Ulm Fire 154.2350 MHz, narrow FM, 110.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Allina Transportation EMS talkgroup 2103 (hex 837).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For New Ulm, start with the New Ulm site of Allied Radio Matrix for Emergency Response (ARMER), about 3 miles away. Its control channels: 852.7875, 853.1 MHz.

Data updated .

New Ulm conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for New Ulm
AgencyDescriptionFrequency (MHz)ToneModeFCC
New Ulm FireNew Ulm Fire – Dispatch154.2350
In 150.7900
110.9 PLFMNWPMG641

New Ulm trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Allina Transportation EMSNew Ulm Dispatch2103837D

Brown County channels that also cover New Ulm

Fire Dispatch

Fire Dispatch frequencies for Brown County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brown County FirePAGE155.1150CSQFMNWNJR996

Hospitals & Medical

Hospitals & Medical frequencies for Brown County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brown County HospitalSleepy Eye Municipal Hospital155.3550131.8 PLFMNWRG837
Brown County HospitalSpringfield Community Hospital155.355082.5 PLFMNKNJM204
New Ulm Medical CenterSioux Valley Hospital155.3550151.4 PLFMNKWF789

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Brown County FireLaw-Fire-EMS Dispatch336038343D
Brown County FireLaw-Fire-EMS Dispatch336058345D
Brown County FireBrown County Fire – Paging336088348D
Brown County HospitalNew Ulm Hospital33612834cD
Brown County HospitalSleepy Eye Medical Center ER33614834eD

Nearest trunked radio sites

Distances are measured from the center of New Ulm.

New Ulm · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 29 (hex 1D) · about 3 mi away
Control 852.7875, 853.1
Voice 851.4875, 851.675, 851.9875, 852.425, 853.4875
Sleepy Eye · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 19 (hex 13) · about 13 mi away
Control 854.2125, 854.5625
Voice 854.0625, 854.3875, 857.0125, 858.0875
Madelia · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 8 (hex 8) · about 18 mi away
Control 854.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in New Ulm?

Fire dispatch channels listed for New Ulm: New Ulm Fire 154.2350 MHz, narrow FM, 110.9 PL.

Do fire departments and EMS use a trunked radio system in New Ulm?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in New Ulm?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in New Ulm?

For New Ulm, start with the New Ulm site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.7875, 853.1 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are New Ulm fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for New Ulm are marked encrypted.

Are New Ulm fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for New Ulm are marked encrypted.