About Searles Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Searles: Brown County Fire 155.1150 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Brown County Fire talkgroup 33603 (hex 8343).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Searles, start with the New Ulm site of Allied Radio Matrix for Emergency Response (ARMER), about 3 miles away. Its control channels: 852.7875, 853.1 MHz.
Data updated .
Brown County channels that also cover Searles
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brown County Fire | PAGE | 155.1150 | CSQ | FMN | WNJR996 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brown County Hospital | Sleepy Eye Municipal Hospital | 155.3550 | 131.8 PL | FMN | WRG837 |
| Brown County Hospital | Springfield Community Hospital | 155.3550 | 82.5 PL | FMN | KNJM204 |
| New Ulm Medical Center | Sioux Valley Hospital | 155.3550 | 151.4 PL | FMN | KWF789 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Brown County Fire | Law-Fire-EMS Dispatch | 33603 | 8343 | D |
| Brown County Fire | Law-Fire-EMS Dispatch | 33605 | 8345 | D |
| Brown County Fire | Brown County Fire – Paging | 33608 | 8348 | D |
| Brown County Hospital | New Ulm Hospital | 33612 | 834c | D |
| Brown County Hospital | Sleepy Eye Medical Center ER | 33614 | 834e | D |
Nearest trunked radio sites
Distances are measured from the center of Searles.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Searles?
We do not have a fire dispatch channel listed specifically for Searles. The county-level fire dispatch channels in the same county: Brown County Fire 155.1150 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Searles?
Yes. The county-level systems that cover Searles are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Searles?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Searles?
For Searles, start with the New Ulm site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.7875, 853.1 MHz. Program a control channel first; the scanner finds the voice channels from it.