About Clay County Fire and EMS Frequencies
Quick answer: Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Clay County Fire talkgroup 49344 (hex c0c0).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Clay County, start with the Moorhead site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 853.45, 856.7625 MHz.
Data updated .
Clay County conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Towns Fire | Hawley Police – Fire – EMS – City Services | 155.1150 | 123.0 PL | FMN | WNWV408 |
Clay County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Clay County Fire | County Fire Announce | 49344 | c0c0 | D |
| Clay County Fire | County Fire Main | 49346 | c0c2 | D |
| Clay County Fire | County Fire Rescue | 49348 | c0c4 | D |
| Clay County Fire | County Fire Rescue | 49350 | c0c6 | D |
| Clay County Fire | Car to Car | 49360 | c0d0 | D |
Radio system sites in Clay County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Clay County
Common questions
Do fire departments and EMS use a trunked radio system in Clay County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Clay County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Clay County?
For Clay County, start with the Moorhead site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 853.45, 856.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Clay County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Clay County are marked encrypted.
Are Clay County fire and EMS talkgroups encrypted?
None of the 5 talkgroups listed for Clay County are marked encrypted.