Skip to content

Alliance Fire and EMS Frequencies

We do not have frequencies listed specifically for Alliance in Clay County, Minnesota yet. Countywide channels for Clay County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Comstock (Allied Radio Matrix for Emergency Response (ARMER)), about 7 miles away.

About Alliance Fire and EMS Frequencies

Quick answer: Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Clay County Fire talkgroup 49344 (hex c0c0).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Alliance, start with the Comstock site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 852.4875, 855.9875 MHz.

Data updated .

Clay County channels that also cover Alliance

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Towns FireHawley Police – Fire – EMS – City Services155.1150123.0 PLFMNWNWV408

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Clay County FireCounty Fire Announce49344c0c0D
Clay County FireCounty Fire Main49346c0c2D
Clay County FireCounty Fire Rescue49348c0c4D
Clay County FireCounty Fire Rescue49350c0c6D
Clay County FireCar to Car49360c0d0D

Nearest trunked radio sites

Distances are measured from the center of Alliance.

Comstock · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 88 (hex 58) · NAC 400 · about 7 mi away
Control 852.4875, 855.9875
Voice 851.9875, 852.15, 857.9375
Fargo (ND) Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 40 (hex 28) · NAC 400 · about 11 mi away
Control 853.125, 853.375, 853.6375, 853.8125
Voice 851.3875, 851.6375, 852.125, 852.375, 852.625, 852.875
Barnsville · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 89 (hex 59) · NAC 401 · about 13 mi away
Control 852.4375, 857.2375
Voice 852.9375, 853.4375, 854.1625, 856.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Alliance?

Yes. The county-level systems that cover Alliance are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Alliance?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Alliance?

For Alliance, start with the Comstock site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.4875, 855.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.