Skip to content

Clearwater County Fire and EMS Frequencies

Clearwater County in Minnesota has 5 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 30 cities and communities below for local fire departments and EMS agencies.

About Clearwater County Fire and EMS Frequencies

Quick answer: Fire dispatch for Clearwater County: Clearwater County Fire 154.4300 MHz, narrow FM, 123.0 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Clearwater County Fire talkgroup 49912 (hex c2f8).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Clearwater County, start with the Berner site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 858.9375, 859.9375 MHz.

Data updated .

Clearwater County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Clearwater County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clearwater County FireClearwater County Fire – Paging154.4300123.0 PLFMNWRA203
Clearwater County FireClearwater County Fire – Paging (Bagley)155.8800
In 158.8950
192.8 PLFMNWPIA392
Clearwater County FireClearwater County Fire – Paging (Gonvick)155.8950
In 158.8950
167.9 PLFMNWPIA392

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clearwater County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clearwater County FireShevlin Fire Department154.2500FMNWNKZ374

Hospitals & Medical

Hospitals & Medical frequencies for Clearwater County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clearwater County HospitalClearwater Co. Hospital155.3250167.9 PLFMNKCE852

Clearwater County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Clearwater County FireClearwater Fire49912c2f8D
Clearwater County FireClearwater Fire49915c2fbD
Clearwater County EMSClearwater EMS49920c300D
Clearwater County EMSClearwater Sanford EMS49904c2f0D

Radio system sites in Clearwater County

Program the control channel first; your scanner finds the voice channels from it.

Berner · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 28 (hex 1C) · NAC 40C
Control 858.9375, 859.9375
Voice 853.9125, 856.9375, 859.2625
Shevlin · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 76 (hex 4C) · NAC 407
Control 852.4875, 856.9875
Voice 851.95, 852.9125, 856.4375
Bagley · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 77 (hex 4D) · NAC 406
Control 858.2125, 858.7625
Voice 852.1, 853.4625, 857.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Clearwater County

Common questions

What frequency does the fire department use in Clearwater County?

Fire dispatch channels listed for Clearwater County: Clearwater County Fire 154.4300 MHz, narrow FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in Clearwater County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Clearwater County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Clearwater County?

For Clearwater County, start with the Berner site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 858.9375, 859.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Clearwater County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Clearwater County are marked encrypted.

Are Clearwater County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Clearwater County are marked encrypted.