About Shevlin Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Shevlin: Clearwater County Fire 154.4300 MHz, narrow FM, 123.0 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Shevlin Fire talkgroup 49917 (hex c2fd).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Shevlin, start with the Shevlin site of Allied Radio Matrix for Emergency Response (ARMER), about 8 miles away. Its control channels: 852.4875, 856.9875 MHz.
Data updated .
Shevlin trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Shevlin Fire | Shevlin Fire | 49917 | c2fd | D |
Clearwater County channels that also cover Shevlin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clearwater County Fire | Clearwater County Fire – Paging | 154.4300 | 123.0 PL | FMN | WRA203 |
| Clearwater County Fire | Clearwater County Fire – Paging (Bagley) | 155.8800 In 158.8950 | 192.8 PL | FMN | WPIA392 |
| Clearwater County Fire | Clearwater County Fire – Paging (Gonvick) | 155.8950 In 158.8950 | 167.9 PL | FMN | WPIA392 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clearwater County Fire | Shevlin Fire Department | 154.2500 | FMN | WNKZ374 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clearwater County Hospital | Clearwater Co. Hospital | 155.3250 | 167.9 PL | FMN | KCE852 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Clearwater County Fire | Clearwater Fire | 49912 | c2f8 | D |
| Clearwater County Fire | Clearwater Fire | 49915 | c2fb | D |
| Clearwater County EMS | Clearwater EMS | 49920 | c300 | D |
| Clearwater County EMS | Clearwater Sanford EMS | 49904 | c2f0 | D |
Nearest trunked radio sites
Distances are measured from the center of Shevlin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Shevlin?
We do not have a fire dispatch channel listed specifically for Shevlin. The county-level fire dispatch channels in the same county: Clearwater County Fire 154.4300 MHz, narrow FM, 123.0 PL.
Do fire departments and EMS use a trunked radio system in Shevlin?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Shevlin?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Shevlin?
For Shevlin, start with the Shevlin site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.4875, 856.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Shevlin fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Shevlin are marked encrypted.