About Hayfield Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hayfield: Dodge County Fire 151.2200 MHz, narrow FM, 136.5 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Hayfield Fire talkgroup 20622 (hex 508e).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hayfield, start with the Dodge - Steele Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 14 miles away. Its control channels: 854.6375, 858.9375 MHz.
Data updated .
Hayfield trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hayfield Fire | Hayfield Fire Operations | 20622 | 508e | D |
Dodge County channels that also cover Hayfield
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dodge County Fire | Dodge County Fire – Paging | 151.2200 In 155.8500 | 136.5 PL | FMN | WPZR702 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Dodge County Fire | Dodge County Fire – Dispatch | 20601 | 5079 | D |
| Dodge County Fire | Fire EMS Paging | 20607 | 507f | D |
| Dodge County Fire | Dodge County Fire – Tactical Channel | 20621 | 508d | D |
| Dodge County Fire | Dodge County Fire – Tactical Channel | 20624 | 5090 | D |
Nearest trunked radio sites
Distances are measured from the center of Hayfield.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hayfield?
We do not have a fire dispatch channel listed specifically for Hayfield. The county-level fire dispatch channels in the same county: Dodge County Fire 151.2200 MHz, narrow FM, 136.5 PL.
Do fire departments and EMS use a trunked radio system in Hayfield?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hayfield?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hayfield?
For Hayfield, start with the Dodge - Steele Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.6375, 858.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hayfield fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Hayfield are marked encrypted.