Skip to content

Vernon Fire and EMS Frequencies

We do not have frequencies listed specifically for Vernon in Dodge County, Minnesota yet. Countywide channels for Dodge County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Elkton (Allied Radio Matrix for Emergency Response (ARMER)), about 16 miles away.

About Vernon Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Vernon: Dodge County Fire 151.2200 MHz, narrow FM, 136.5 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Dodge County Fire talkgroup 20601 (hex 5079).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Vernon, start with the Elkton site of Allied Radio Matrix for Emergency Response (ARMER), about 16 miles away. Its control channels: 856.2375 MHz.

Data updated .

Dodge County channels that also cover Vernon

Fire Dispatch

Fire Dispatch frequencies for Dodge County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dodge County FireDodge County Fire – Paging151.2200
In 155.8500
136.5 PLFMNWPZR702

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Dodge County FireDodge County Fire – Dispatch206015079D
Dodge County FireFire EMS Paging20607507fD
Dodge County FireDodge County Fire – Tactical Channel20621508dD
Dodge County FireDodge County Fire – Tactical Channel206245090D

Nearest trunked radio sites

Distances are measured from the center of Vernon.

Elkton · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 5 (hex 5) · about 16 mi away
Control 856.2375
Voice 852.1, 857.4375, 857.7125, 858.7125, 859.0875, 859.4375
Dodge - Steele Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 25 (hex 19) · about 18 mi away
Control 854.6375, 858.9375
Voice 851.4, 851.875, 852.375, 853.05, 853.55, 853.85, 854.1125, 854.3875, 856.0125, 857.0375, 857.9375, 859.0375
Olmsted Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 41 (hex 29) · NAC 401 · about 18 mi away
Control 851.5375, 853.5125, 853.6125
Voice 851.05, 851.15, 851.3, 853.2625, 853.775, 857.4875, 858.4875, 859.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Vernon?

We do not have a fire dispatch channel listed specifically for Vernon. The county-level fire dispatch channels in the same county: Dodge County Fire 151.2200 MHz, narrow FM, 136.5 PL.

Do fire departments and EMS use a trunked radio system in Vernon?

Yes. The county-level systems that cover Vernon are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Vernon?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Vernon?

For Vernon, start with the Elkton site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 856.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.