About Holmes City Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Holmes City: Douglas County Fire 154.0250 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Holmes City Fire talkgroup 27527 (hex 6b87).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Holmes City, start with the Hoffman site of Allied Radio Matrix for Emergency Response (ARMER), about 8 miles away. Its control channels: 857.9375, 858.9375 MHz.
Data updated .
Holmes City trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Holmes City Fire | Holmes City Fire | 27527 | 6b87 | D |
Douglas County channels that also cover Holmes City
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Douglas County Fire | Douglas County Fire – Paging – EMS – FIRE | 154.0250 In 155.8800 | CSQ | FMN | WQQK532 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Douglas County Fire | Douglas County Fire – Fire Ground | 151.8200 | 156.7 PL | FMN | — |
| Douglas County Fire | County Fire Depts. | 154.1750 | 156.7 PL | FMN | WPYK406 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Douglas County Hospital | Douglas County Hospital – EMS | 155.3550 | 131.8 PL | FMN | KEC980 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Douglas County Fire | Douglas County Fire – Dispatch | 27509 | 6b75 | D |
Nearest trunked radio sites
Distances are measured from the center of Holmes City.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Holmes City?
We do not have a fire dispatch channel listed specifically for Holmes City. The county-level fire dispatch channels in the same county: Douglas County Fire 154.0250 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Holmes City?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Holmes City?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Holmes City?
For Holmes City, start with the Hoffman site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 857.9375, 858.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Holmes City fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Holmes City are marked encrypted.