Skip to content

Urness Fire and EMS Frequencies

We do not have frequencies listed specifically for Urness in Douglas County, Minnesota yet. Countywide channels for Douglas County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Hoffman (Allied Radio Matrix for Emergency Response (ARMER)), about 4 miles away.

About Urness Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Urness: Douglas County Fire 154.0250 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Douglas County Fire talkgroup 27509 (hex 6b75).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Urness, start with the Hoffman site of Allied Radio Matrix for Emergency Response (ARMER), about 4 miles away. Its control channels: 857.9375, 858.9375 MHz.

Data updated .

Douglas County channels that also cover Urness

Fire Dispatch

Fire Dispatch frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County FireDouglas County Fire – Paging – EMS – FIRE154.0250
In 155.8800
CSQFMNWQQK532

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County FireDouglas County Fire – Fire Ground151.8200156.7 PLFMN—
Douglas County FireCounty Fire Depts.154.1750156.7 PLFMNWPYK406

Hospitals & Medical

Hospitals & Medical frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County HospitalDouglas County Hospital – EMS155.3550131.8 PLFMNKEC980

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Douglas County FireDouglas County Fire – Dispatch275096b75D

Nearest trunked radio sites

Distances are measured from the center of Urness.

Hoffman · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 8 (hex 8) · NAC 40D · about 4 mi away
Control 857.9375, 858.9375
Voice 853.85, 856.4625, 859.9375, 860.9375
Ashby · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 83 (hex 53) · NAC 407 · about 11 mi away
Control 851.4875, 851.725
Voice 852.975, 853.3875, 853.7625, 856.7125
Garfield · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 87 (hex 57) · NAC 402 · about 11 mi away
Control 852.35, 853.475
Voice 851.3125, 851.9875, 853.8875, 855.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Urness?

We do not have a fire dispatch channel listed specifically for Urness. The county-level fire dispatch channels in the same county: Douglas County Fire 154.0250 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Urness?

Yes. The county-level systems that cover Urness are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Urness?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Urness?

For Urness, start with the Hoffman site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 857.9375, 858.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.