Skip to content

Brandon Fire and EMS Frequencies

Brandon in Douglas County, Minnesota has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Garfield (Allied Radio Matrix for Emergency Response (ARMER)), about 6 miles away.

About Brandon Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Brandon: Douglas County Fire 154.0250 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Brandon Fire talkgroup 27522 (hex 6b82).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Brandon, start with the Garfield site of Allied Radio Matrix for Emergency Response (ARMER), about 6 miles away. Its control channels: 852.35, 853.475 MHz.

Data updated .

Brandon trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Brandon FireBrandon Fire275226b82D

Douglas County channels that also cover Brandon

Fire Dispatch

Fire Dispatch frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County FireDouglas County Fire – Paging – EMS – FIRE154.0250
In 155.8800
CSQFMNWQQK532

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County FireDouglas County Fire – Fire Ground151.8200156.7 PLFMN—
Douglas County FireCounty Fire Depts.154.1750156.7 PLFMNWPYK406

Hospitals & Medical

Hospitals & Medical frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County HospitalDouglas County Hospital – EMS155.3550131.8 PLFMNKEC980

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Douglas County FireDouglas County Fire – Dispatch275096b75D

Nearest trunked radio sites

Distances are measured from the center of Brandon.

Garfield · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 87 (hex 57) · NAC 402 · about 6 mi away
Control 852.35, 853.475
Voice 851.3125, 851.9875, 853.8875, 855.2125
Hoffman · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 8 (hex 8) · NAC 40D · about 11 mi away
Control 857.9375, 858.9375
Voice 853.85, 856.4625, 859.9375, 860.9375
Ashby · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 83 (hex 53) · NAC 407 · about 12 mi away
Control 851.4875, 851.725
Voice 852.975, 853.3875, 853.7625, 856.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Brandon?

We do not have a fire dispatch channel listed specifically for Brandon. The county-level fire dispatch channels in the same county: Douglas County Fire 154.0250 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Brandon?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Brandon?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Brandon?

For Brandon, start with the Garfield site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.35, 853.475 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Brandon fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Brandon are marked encrypted.