Skip to content

Elk Lake Fire and EMS Frequencies

We do not have frequencies listed specifically for Elk Lake in Grant County, Minnesota yet. Countywide channels for Grant County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Hoffman (Allied Radio Matrix for Emergency Response (ARMER)), about 6 miles away.

About Elk Lake Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Elk Lake: Grant County Fire 154.2500 MHz, narrow FM, CSQ. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Grant County Fire talkgroup 27316 (hex 6ab4).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Elk Lake, start with the Hoffman site of Allied Radio Matrix for Emergency Response (ARMER), about 6 miles away. Its control channels: 857.9375, 858.9375 MHz.

Data updated .

Grant County channels that also cover Elk Lake

Fire Dispatch

Fire Dispatch frequencies for Grant County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grant County FirePaging X154.2500
In 155.9100
CSQFMNKNFY944

Hospitals & Medical

Hospitals & Medical frequencies for Grant County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grant County HospitalGrant Health / Medical Center155.355071.9 PLFMNKNEQ267

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Grant County FireGrant Co Fire Dispatch273166ab4D

Nearest trunked radio sites

Distances are measured from the center of Elk Lake.

Hoffman · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 8 (hex 8) · NAC 40D · about 6 mi away
Control 857.9375, 858.9375
Voice 853.85, 856.4625, 859.9375, 860.9375
Ashby · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 83 (hex 53) · NAC 407 · about 9 mi away
Control 851.4875, 851.725
Voice 852.975, 853.3875, 853.7625, 856.7125
Garfield · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 87 (hex 57) · NAC 402 · about 16 mi away
Control 852.35, 853.475
Voice 851.3125, 851.9875, 853.8875, 855.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Elk Lake?

We do not have a fire dispatch channel listed specifically for Elk Lake. The county-level fire dispatch channels in the same county: Grant County Fire 154.2500 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Elk Lake?

Yes. The county-level systems that cover Elk Lake are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Elk Lake?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Elk Lake?

For Elk Lake, start with the Hoffman site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 857.9375, 858.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.