Skip to content

Dunbar Fire and EMS Frequencies

We do not have frequencies listed specifically for Dunbar in Faribault County, Minnesota yet. Countywide channels for Faribault County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Waldorf (Allied Radio Matrix for Emergency Response (ARMER)), about 9 miles away.

About Dunbar Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Dunbar: Faribault County Fire 154.1600 MHz, narrow FM, 156.7 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Faribault County Fire talkgroup 35008 (hex 88c0).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dunbar, start with the Waldorf site of Allied Radio Matrix for Emergency Response (ARMER), about 9 miles away. Its control channels: 852.9125 MHz.

Data updated .

Faribault County channels that also cover Dunbar

Fire Dispatch

Fire Dispatch frequencies for Faribault County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Faribault County FireFaribault County Fire – Dispatch154.1600156.7 PLFMNWNKA403
Faribault County FirePAGE155.0550CSQFMNKXQ897
Faribault County FireFaribault County Fire – Paging158.040091.5 PLFMNWPXN905

Hospitals & Medical

Hospitals & Medical frequencies for Faribault County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support & FacilitiesUnited Hospital EMS155.3550167.9 PLFMNKRV406

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Faribault County FireCounty Fire Dispatch3500888c0D
Faribault County EMSCounty EMS Dispatch3501188c3D
Faribault County HospitalUnited Hospital Blue Earth3501288c4D

Nearest trunked radio sites

Distances are measured from the center of Dunbar.

Waldorf · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 82 (hex 52) · about 9 mi away
Control 852.9125
Voice 851.3125, 851.475, 852.4125, 853.8875, 856.4875
New Richland · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 4 (hex 4) · about 12 mi away
Control 854.2875
Voice 854.5375, 854.6875, 857.4625, 858.7375, 859.7375
Alden · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 80 (hex 50) · about 13 mi away
Control 856.9625
Voice 856.7125, 857.9625, 858.4625, 858.9625, 859.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Dunbar?

We do not have a fire dispatch channel listed specifically for Dunbar. The county-level fire dispatch channels in the same county: Faribault County Fire 154.1600 MHz, narrow FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Dunbar?

Yes. The county-level systems that cover Dunbar are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Dunbar?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Dunbar?

For Dunbar, start with the Waldorf site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.