Skip to content

Chatfield Fire and EMS Frequencies

Chatfield in Fillmore County, Minnesota has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Troy - Utica (Allied Radio Matrix for Emergency Response (ARMER)), about 9 miles away.

Chatfield also extends into Olmsted County.

About Chatfield Fire and EMS Frequencies

Quick answer: Fire dispatch for Chatfield: Chatfield Fire 155.1000 MHz, narrow FM, 97.4 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Fillmore County Fire talkgroup 20822 (hex 5156).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Chatfield, start with the Troy - Utica site of Allied Radio Matrix for Emergency Response (ARMER), about 9 miles away. Its control channels: 855.4625 MHz.

Data updated .

Chatfield conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Chatfield
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chatfield FireChatfield Fire – Dispatch155.1000
In 159.0300
97.4 PLFMNWPBK227

Fillmore County channels that also cover Chatfield

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Fillmore County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fillmore County FireFillmore County Fire – Fire Ground154.2200110.9 PLFMNWZC677

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Fillmore County FireFire EMS Dispatch208225156D
Fillmore County FireFillmore County Fire – Tactical Channel (1)208505172D
Fillmore County FireFillmore County Fire – Tactical Channel (2)208515173D

Nearest trunked radio sites

Distances are measured from the center of Chatfield.

Troy - Utica · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 15 (hex F) · NAC 405 · about 9 mi away
Control 855.4625
Voice 853.075, 856.4875, 856.7625, 858.2625, 859.9875
Wykoff · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 18 (hex 12) · about 14 mi away
Control 856.9375
Voice 857.7625, 858.2375, 858.7375, 859.7125
Olmsted Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 41 (hex 29) · NAC 401 · about 16 mi away
Control 851.5375, 853.5125, 853.6125
Voice 851.05, 851.15, 851.3, 853.2625, 853.775, 857.4875, 858.4875, 859.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Chatfield?

Fire dispatch channels listed for Chatfield: Chatfield Fire 155.1000 MHz, narrow FM, 97.4 PL.

Do fire departments and EMS use a trunked radio system in Chatfield?

Yes. The county-level systems that cover Chatfield are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Chatfield?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Chatfield?

For Chatfield, start with the Troy - Utica site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 855.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Chatfield fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Chatfield are marked encrypted.