Skip to content

Olmsted County Fire and EMS Frequencies

Olmsted County in Minnesota has 6 countywide conventional frequencies and 14 countywide talkgroups in our database. Use the list of 20 cities and communities below for local fire departments and EMS agencies.

About Olmsted County Fire and EMS Frequencies

Quick answer: Fire dispatch for Olmsted County: Olmsted County Fire 155.4900 MHz, narrow FM, no tone. EMS dispatch for Olmsted County: Medical Support & Facilities 155.2800 MHz, narrow FM, 141.3 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Olmsted County Fire talkgroup 20448 (hex 4fe0).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Olmsted County, start with the Olmsted Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 851.5375, 853.5125, 853.6125 MHz.

Data updated .

Olmsted County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Olmsted County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Olmsted County FireCounty Paging155.4900
In 156.0900
FMNKAB816

EMS Dispatch

EMS Dispatch frequencies for Olmsted County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support & FacilitiesGold Cross Ambulance Primary155.2800141.3 PLFMNKDR729
Medical Support & FacilitiesGold Cross Ambulance Backup155.3400141.3 PLFMNKLX400
Medical Support & FacilitiesMayo One Dispatch155.4000162.2 PLFMNKLX400

Hospitals & Medical

Hospitals & Medical frequencies for Olmsted County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support & FacilitiesRochester Regional EMS155.3850141.3 PLFMNKLX400
Olmsted Medical CenterOlmsted Medical Center160.1550FMNWQBF583

Olmsted County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Olmsted County FireRochester Airport Fire Dispatch204484fe0D
Olmsted County FireOlmsted County Fire – Dispatch (154.370)204764ffcD
Olmsted County FireCounty Fire Tactical203744f96D
Olmsted County FireRochester Airport Fire Tactical204404fd8D
Olmsted County FireCounty Fire Operations204724ff8D
Olmsted County FireCounty Fire20494500eD
Olmsted County FireFire Department 20464204644ff0D
Olmsted County EMSRochester Methodist Hospital205985076D
Olmsted County EMSMayo – Rochester Dispatch21610546aD
Olmsted County EMSGold Cross – Rochester – Saint Marys21614546eD
Olmsted County EMSMayo – Rochester Operations216055465D
Olmsted County EMSMayo – Rochester Operations21612546cD
Olmsted County HospitalGold Cross Ambulance Dispatch – Rochester (simulcast of 155.2800)204344fd2D
Olmsted County HospitalMayo – Rochester Intercept216085468D

Radio system sites in Olmsted County

Program the control channel first; your scanner finds the voice channels from it.

Olmsted Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 41 (hex 29) · NAC 401
Control 851.5375, 853.5125, 853.6125
Voice 851.05, 851.15, 851.3, 853.2625, 853.775, 857.4875, 858.4875, 859.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Olmsted County

Common questions

What frequency does the fire department use in Olmsted County?

Fire dispatch channels listed for Olmsted County: Olmsted County Fire 155.4900 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Olmsted County?

EMS dispatch channels listed for Olmsted County: Medical Support & Facilities 155.2800 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Olmsted County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 14 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Olmsted County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Olmsted County?

For Olmsted County, start with the Olmsted Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.5375, 853.5125, 853.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Olmsted County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Olmsted County are marked encrypted.

Are Olmsted County fire and EMS talkgroups encrypted?

None of the 14 talkgroups listed for Olmsted County are marked encrypted.