Skip to content

Quincy Fire and EMS Frequencies

We do not have frequencies listed specifically for Quincy in Olmsted County, Minnesota yet. Countywide channels for Olmsted County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Elba (Allied Radio Matrix for Emergency Response (ARMER)), about 6 miles away.

About Quincy Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Quincy: Olmsted County Fire 155.4900 MHz, narrow FM, no tone. County-level ems dispatch that covers Quincy: Medical Support & Facilities 155.2800 MHz, narrow FM, 141.3 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Olmsted County Fire talkgroup 20448 (hex 4fe0).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Quincy, start with the Elba site of Allied Radio Matrix for Emergency Response (ARMER), about 6 miles away. Its control channels: 856.4625 MHz.

Data updated .

Olmsted County channels that also cover Quincy

Fire Dispatch

Fire Dispatch frequencies for Olmsted County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Olmsted County FireCounty Paging155.4900
In 156.0900
FMNKAB816

EMS Dispatch

EMS Dispatch frequencies for Olmsted County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support & FacilitiesGold Cross Ambulance Primary155.2800141.3 PLFMNKDR729
Medical Support & FacilitiesGold Cross Ambulance Backup155.3400141.3 PLFMNKLX400
Medical Support & FacilitiesMayo One Dispatch155.4000162.2 PLFMNKLX400

Hospitals & Medical

Hospitals & Medical frequencies for Olmsted County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support & FacilitiesRochester Regional EMS155.3850141.3 PLFMNKLX400
Olmsted Medical CenterOlmsted Medical Center160.1550FMNWQBF583

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Olmsted County FireRochester Airport Fire Dispatch204484fe0D
Olmsted County FireOlmsted County Fire – Dispatch (154.370)204764ffcD
Olmsted County FireCounty Fire Tactical203744f96D
Olmsted County FireRochester Airport Fire Tactical204404fd8D
Olmsted County FireCounty Fire Operations204724ff8D
Olmsted County FireCounty Fire20494500eD
Olmsted County FireFire Department 20464204644ff0D
Olmsted County EMSRochester Methodist Hospital205985076D
Olmsted County EMSMayo – Rochester Dispatch21610546aD
Olmsted County EMSGold Cross – Rochester – Saint Marys21614546eD
Olmsted County EMSMayo – Rochester Operations216055465D
Olmsted County EMSMayo – Rochester Operations21612546cD
Olmsted County HospitalGold Cross Ambulance Dispatch – Rochester (simulcast of 155.2800)204344fd2D
Olmsted County HospitalMayo – Rochester Intercept216085468D

Nearest trunked radio sites

Distances are measured from the center of Quincy.

Elba · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 21 (hex 15) · about 6 mi away
Control 856.4625
Voice 851.2125, 851.975, 857.4625, 858.4625, 859.4625
Olmsted Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 41 (hex 29) · NAC 401 · about 14 mi away
Control 851.5375, 853.5125, 853.6125
Voice 851.05, 851.15, 851.3, 853.2625, 853.775, 857.4875, 858.4875, 859.4875
Wabasha Co. - Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 42 (hex 2A) · about 14 mi away
Control 854.6625, 856.2125
Voice 851.3875, 851.85, 852.4125, 853.9125, 857.2125, 858.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Quincy?

We do not have a fire dispatch channel listed specifically for Quincy. The county-level fire dispatch channels in the same county: Olmsted County Fire 155.4900 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Quincy?

We do not have a EMS dispatch channel listed specifically for Quincy. The county-level EMS dispatch channels in the same county: Medical Support & Facilities 155.2800 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Quincy?

Yes. The county-level systems that cover Quincy are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 14 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Quincy?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Quincy?

For Quincy, start with the Elba site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 856.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.