About Houston County Fire and EMS Frequencies
Quick answer: Fire dispatch for Houston County: Houston County Fire 154.3550 MHz, narrow FM, 192.8 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Houston County Fire talkgroup 22023 (hex 5607).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Houston County, start with the Caledonia site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 858.4375 MHz.
Data updated .
Houston County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Houston County Fire | County Fire | 154.3550 In 153.7700 | 192.8 PL | FMN | KUT918 |
Houston County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Houston County Fire | County Fire Dispatch | 22023 | 5607 | D |
| Houston County Fire | County Fire | 22024 | 5608 | D |
| Houston County Fire | County Fire | 22025 | 5609 | D |
Radio system sites in Houston County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Houston County
Common questions
What frequency does the fire department use in Houston County?
Fire dispatch channels listed for Houston County: Houston County Fire 154.3550 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Houston County?
Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Houston County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Houston County?
For Houston County, start with the Caledonia site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 858.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Houston County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Houston County are marked encrypted.
Are Houston County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Houston County are marked encrypted.