About Clay Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Clay: Hubbard County Fire 154.3700 MHz, narrow FM, 123.0 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Hubbard County Fire talkgroup 49711 (hex c22f).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 17 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Clay, start with the Kabekona Lookout site of Allied Radio Matrix for Emergency Response (ARMER), about 8 miles away. Its control channels: 851.4625, 851.8 MHz.
Data updated .
Hubbard County channels that also cover Clay
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hubbard County Fire | Park Rapids Fire Paging – ARMER TG 49712 | 154.3700 | 123.0 PL | FMN | KOB562 |
| Hubbard County Fire | County Fire – EMS Paging X 6 Locations | 155.9550 | FMN | WQUY881 | |
| Hubbard County Fire | Hubbard County Fire – Paging | 460.6000 In 465.6000 | 141.3 PL | FMN | WNUV641 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hubbard County Fire | Nevis Fire Department | 154.0400 | FMN | WQAB841 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hubbard County EMS | North Ambulance Service | 154.5150 | 123.0 PL | FMN | WQDU916 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hubbard County Hospital | Saint Joseph's Hosp. / EMS | 155.3250 | 123.0 PL | FMN | WPLW983 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hubbard County Fire | County Fire Announce | 49711 | c22f | D |
| Hubbard County Fire | County Fire 1 Dispatch | 49712 | c230 | D |
| Hubbard County Fire | County Fire 2 Dispatch | 49713 | c231 | D |
| Hubbard County Fire | County Fire 3 Dispatch | 49714 | c232 | D |
| Hubbard County Fire | County Fire 4 Dispatch | 49715 | c233 | D |
| Hubbard County Fire | County Search & Rescue | 49716 | c234 | D |
| Hubbard County Fire | County Fire Tactical | 49719 | c237 | D |
| Hubbard County Fire | County Fire Tactical | 49720 | c238 | D |
| Hubbard County Fire | Hubbard-Beltrami Co VHF Fire Department | 49744 | c250 | D |
| Hubbard County Fire | Hubbard-Becker Co VHF Fire Department | 49745 | c251 | D |
| Hubbard County Fire | Hubbard-Clearwater Co VHF Fire Department | 49746 | c252 | D |
| Hubbard County Fire | County Fire/EMS Tactical | 49721 | c239 | D |
| Hubbard County EMS | County EMS 1 Dispatch | 49717 | c235 | D |
| Hubbard County EMS | County EMS 2 Dispatch | 49718 | c236 | D |
| Hubbard County EMS | Hubbard 1st Response Administration | 49724 | c23c | D |
| Hubbard County EMS | North EMS Hubbard Co Administration | 49728 | c240 | D |
| Hubbard County Hospital | St Joe's Hospital Park Rapids Administration | 49722 | c23a | D |
Nearest trunked radio sites
Distances are measured from the center of Clay.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Clay?
We do not have a fire dispatch channel listed specifically for Clay. The county-level fire dispatch channels in the same county: Hubbard County Fire 154.3700 MHz, narrow FM, 123.0 PL.
Do fire departments and EMS use a trunked radio system in Clay?
Yes. The county-level systems that cover Clay are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 17 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Clay?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Clay?
For Clay, start with the Kabekona Lookout site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.4625, 851.8 MHz. Program a control channel first; the scanner finds the voice channels from it.