Skip to content

Thorpe Fire and EMS Frequencies

We do not have frequencies listed specifically for Thorpe in Hubbard County, Minnesota yet. Countywide channels for Hubbard County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kabekona Lookout (Allied Radio Matrix for Emergency Response (ARMER)), about 7 miles away.

About Thorpe Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Thorpe: Hubbard County Fire 154.3700 MHz, narrow FM, 123.0 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Hubbard County Fire talkgroup 49711 (hex c22f).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 17 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Thorpe, start with the Kabekona Lookout site of Allied Radio Matrix for Emergency Response (ARMER), about 7 miles away. Its control channels: 851.4625, 851.8 MHz.

Data updated .

Hubbard County channels that also cover Thorpe

Fire Dispatch

Fire Dispatch frequencies for Hubbard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hubbard County FirePark Rapids Fire Paging – ARMER TG 49712154.3700123.0 PLFMNKOB562
Hubbard County FireCounty Fire – EMS Paging X 6 Locations155.9550FMNWQUY881
Hubbard County FireHubbard County Fire – Paging460.6000
In 465.6000
141.3 PLFMNWNUV641

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hubbard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hubbard County FireNevis Fire Department154.0400FMNWQAB841

EMS Tactical

EMS Tactical frequencies for Hubbard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hubbard County EMSNorth Ambulance Service154.5150123.0 PLFMNWQDU916

Hospitals & Medical

Hospitals & Medical frequencies for Hubbard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hubbard County HospitalSaint Joseph's Hosp. / EMS155.3250123.0 PLFMNWPLW983

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Hubbard County FireCounty Fire Announce49711c22fD
Hubbard County FireCounty Fire 1 Dispatch49712c230D
Hubbard County FireCounty Fire 2 Dispatch49713c231D
Hubbard County FireCounty Fire 3 Dispatch49714c232D
Hubbard County FireCounty Fire 4 Dispatch49715c233D
Hubbard County FireCounty Search & Rescue49716c234D
Hubbard County FireCounty Fire Tactical49719c237D
Hubbard County FireCounty Fire Tactical49720c238D
Hubbard County FireHubbard-Beltrami Co VHF Fire Department49744c250D
Hubbard County FireHubbard-Becker Co VHF Fire Department49745c251D
Hubbard County FireHubbard-Clearwater Co VHF Fire Department49746c252D
Hubbard County FireCounty Fire/EMS Tactical49721c239D
Hubbard County EMSCounty EMS 1 Dispatch49717c235D
Hubbard County EMSCounty EMS 2 Dispatch49718c236D
Hubbard County EMSHubbard 1st Response Administration49724c23cD
Hubbard County EMSNorth EMS Hubbard Co Administration49728c240D
Hubbard County HospitalSt Joe's Hospital Park Rapids Administration49722c23aD

Nearest trunked radio sites

Distances are measured from the center of Thorpe.

Kabekona Lookout · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 71 (hex 47) · about 7 mi away
Control 851.4625, 851.8
Voice 853.45, 858.2375, 859.4875
Cass Lake · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 4 (hex 4) · NAC 401 · about 13 mi away
Control 851.3875, 857.9625
Voice 856.4875, 856.6875, 857.6875, 857.7375, 858.4375
Mantrap · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 70 (hex 46) · NAC 40B · about 13 mi away
Control 852.2, 859.7625
Voice 853.425, 856.7625, 857.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Thorpe?

We do not have a fire dispatch channel listed specifically for Thorpe. The county-level fire dispatch channels in the same county: Hubbard County Fire 154.3700 MHz, narrow FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in Thorpe?

Yes. The county-level systems that cover Thorpe are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 17 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Thorpe?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Thorpe?

For Thorpe, start with the Kabekona Lookout site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.4625, 851.8 MHz. Program a control channel first; the scanner finds the voice channels from it.