Skip to content

Kimball Fire and EMS Frequencies

We do not have frequencies listed specifically for Kimball in Jackson County, Minnesota yet. Countywide channels for Jackson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Mountain Lake (Allied Radio Matrix for Emergency Response (ARMER)), about 10 miles away.

About Kimball Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Kimball: Jackson County Fire 158.8200 MHz, narrow FM, 186.2 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Jackson County Fire talkgroup 31304 (hex 7a48).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Kimball, start with the Mountain Lake site of Allied Radio Matrix for Emergency Response (ARMER), about 10 miles away. Its control channels: 857.2625, 858.2625 MHz.

Data updated .

Jackson County channels that also cover Kimball

Fire Dispatch

Fire Dispatch frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County FireFIRE-EMS158.8200
In 155.9850
186.2 PLFMNWNGN653

Hospitals & Medical

Hospitals & Medical frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County HospitalJackson Medical Center155.4000107.2 PLFMNWGR854

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Jackson County FireJackson County Fire – Dispatch313047a48D

Nearest trunked radio sites

Distances are measured from the center of Kimball.

Mountain Lake · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 35 (hex 23) · about 10 mi away
Control 857.2625, 858.2625
Voice 852.1, 853.125, 853.875
Windom · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 30 (hex 1E) · about 10 mi away
Control 853.175, 857.2125
Voice 852.175, 855.4875, 856.7125
Lakefield · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 24 (hex 18) · about 13 mi away
Control 851.375, 851.775
Voice 852.9125, 858.7375, 859.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Kimball?

We do not have a fire dispatch channel listed specifically for Kimball. The county-level fire dispatch channels in the same county: Jackson County Fire 158.8200 MHz, narrow FM, 186.2 PL.

Do fire departments and EMS use a trunked radio system in Kimball?

Yes. The county-level systems that cover Kimball are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Kimball?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Kimball?

For Kimball, start with the Mountain Lake site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 857.2625, 858.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.