Skip to content

Grove City Fire and EMS Frequencies

Grove City in Meeker County, Minnesota has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Meeker Co. Simulcast (Allied Radio Matrix for Emergency Response (ARMER)), about 10 miles away.

About Grove City Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Grove City: Meeker County Fire 154.4450 MHz, narrow FM, 223 DPL. County-level ems dispatch that covers Grove City: Meeker County EMS 155.2950 MHz, narrow FM, 125 DPL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Grove City Fire talkgroup 25554 (hex 63d2).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Grove City, start with the Meeker Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER), about 10 miles away. Its control channels: 852.225, 853.875 MHz.

Data updated .

Grove City trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Grove City FireGrove City Fire Department2555463d2D

Meeker County channels that also cover Grove City

Fire Dispatch

Fire Dispatch frequencies for Meeker County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meeker County FireFire EMS Dispatch Paging154.4450223 DPLFMNWSID438
Meeker County FireLitchfield Fire Paging154.4450123.0 PLFMNWSID438

EMS Dispatch

EMS Dispatch frequencies for Meeker County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meeker County EMSEMS Operations (Gold Cross Ambulance)155.2950125 DPLFMNWPMV740

Hospitals & Medical

Hospitals & Medical frequencies for Meeker County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meeker County HospitalMeeker County Hospital155.4000110.9 PLFMNKNDT250

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Meeker County FireMeeker County Fire – Dispatch2555063ceD
Meeker County EMSMayo – Meeker County Dispatch272026a42D
Meeker County HospitalMeeker Memorial Hospital – Litchfield256506432D

Nearest trunked radio sites

Distances are measured from the center of Grove City.

Meeker Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 43 (hex 2B) · about 10 mi away
Control 852.225, 853.875
Voice 851.1, 852.625, 853.325, 854.5375, 856.0625, 856.4625, 857.4625, 858.4625
Lake Lillian · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 33 (hex 21) · about 14 mi away
Control 851.2875, 851.975
Voice 851.0375, 852.15, 853.05, 853.5875, 853.8375
Paynesville · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 35 (hex 23) · NAC 40c · about 16 mi away
Control 854.4625, 858.0625
Voice 854.1625, 856.6875, 857.5875, 859.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Grove City?

We do not have a fire dispatch channel listed specifically for Grove City. The county-level fire dispatch channels in the same county: Meeker County Fire 154.4450 MHz, narrow FM, 223 DPL.

What frequency does EMS or the ambulance service use in Grove City?

We do not have a EMS dispatch channel listed specifically for Grove City. The county-level EMS dispatch channels in the same county: Meeker County EMS 155.2950 MHz, narrow FM, 125 DPL.

Do fire departments and EMS use a trunked radio system in Grove City?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Grove City?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Grove City?

For Grove City, start with the Meeker Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.225, 853.875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Grove City fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Grove City are marked encrypted.