Skip to content

Meeker County Fire and EMS Frequencies

Meeker County in Minnesota has 4 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 20 cities and communities below for local fire departments and EMS agencies.

About Meeker County Fire and EMS Frequencies

Quick answer: Fire dispatch for Meeker County: Meeker County Fire 154.4450 MHz, narrow FM, 223 DPL. EMS dispatch for Meeker County: Meeker County EMS 155.2950 MHz, narrow FM, 125 DPL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Meeker County Fire talkgroup 25550 (hex 63ce).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Meeker County, start with the Meeker Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 852.225, 853.875 MHz.

Data updated .

Meeker County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Meeker County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meeker County FireFire EMS Dispatch Paging154.4450223 DPLFMNWSID438
Meeker County FireLitchfield Fire Paging154.4450123.0 PLFMNWSID438

EMS Dispatch

EMS Dispatch frequencies for Meeker County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meeker County EMSEMS Operations (Gold Cross Ambulance)155.2950125 DPLFMNWPMV740

Hospitals & Medical

Hospitals & Medical frequencies for Meeker County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meeker County HospitalMeeker County Hospital155.4000110.9 PLFMNKNDT250

Meeker County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Meeker County FireMeeker County Fire – Dispatch2555063ceD
Meeker County EMSMayo – Meeker County Dispatch272026a42D
Meeker County HospitalMeeker Memorial Hospital – Litchfield256506432D

Radio system sites in Meeker County

Program the control channel first; your scanner finds the voice channels from it.

Meeker Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 43 (hex 2B)
Control 852.225, 853.875
Voice 851.1, 852.625, 853.325, 854.5375, 856.0625, 856.4625, 857.4625, 858.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Meeker County

Common questions

What frequency does the fire department use in Meeker County?

Fire dispatch channels listed for Meeker County: Meeker County Fire 154.4450 MHz, narrow FM, 223 DPL.

What frequency does EMS or the ambulance service use in Meeker County?

EMS dispatch channels listed for Meeker County: Meeker County EMS 155.2950 MHz, narrow FM, 125 DPL.

Do fire departments and EMS use a trunked radio system in Meeker County?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Meeker County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Meeker County?

For Meeker County, start with the Meeker Co. Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.225, 853.875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Meeker County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Meeker County are marked encrypted.

Are Meeker County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Meeker County are marked encrypted.