Skip to content

Watkins Fire and EMS Frequencies

Watkins in Meeker County, Minnesota has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Kimball (Allied Radio Matrix for Emergency Response (ARMER)), about 5 miles away.

About Watkins Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Watkins: Meeker County Fire 154.4450 MHz, narrow FM, 223 DPL. County-level ems dispatch that covers Watkins: Meeker County EMS 155.2950 MHz, narrow FM, 125 DPL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Watkins Fire talkgroup 25556 (hex 63d4).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup; Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Watkins, start with the Kimball site of Allied Radio Matrix for Emergency Response (ARMER), about 5 miles away. Its control channels: 851.9875, 853.675 MHz.

Data updated .

Watkins trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Watkins FireWatkins Fire – Rescue – EMS2555663d4D

Meeker County channels that also cover Watkins

Fire Dispatch

Fire Dispatch frequencies for Meeker County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meeker County FireFire EMS Dispatch Paging154.4450223 DPLFMNWSID438
Meeker County FireLitchfield Fire Paging154.4450123.0 PLFMNWSID438

EMS Dispatch

EMS Dispatch frequencies for Meeker County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meeker County EMSEMS Operations (Gold Cross Ambulance)155.2950125 DPLFMNWPMV740

Hospitals & Medical

Hospitals & Medical frequencies for Meeker County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meeker County HospitalMeeker County Hospital155.4000110.9 PLFMNKNDT250

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Meeker County FireMeeker County Fire – Dispatch2555063ceD
Meeker County EMSMayo – Meeker County Dispatch272026a42D
Meeker County HospitalMeeker Memorial Hospital – Litchfield256506432D

Nearest trunked radio sites

Distances are measured from the center of Watkins.

Kimball · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 11 (hex B) · about 5 mi away
Control 851.9875, 853.675
Voice 851.725, 852.1875, 852.25, 852.35, 852.4875, 852.9, 854.7375
Cold Spring · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 34 (hex 22) · about 10 mi away
Control 855.9125, 857.1125
Voice 856.5375, 857.6625, 858.0375, 858.1875, 859.1875
Farming · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 20 (hex 14) · about 15 mi away
Control 852.45, 852.85, 853.3
Voice 851.2, 852.125, 855.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Watkins?

We do not have a fire dispatch channel listed specifically for Watkins. The county-level fire dispatch channels in the same county: Meeker County Fire 154.4450 MHz, narrow FM, 223 DPL.

What frequency does EMS or the ambulance service use in Watkins?

We do not have a EMS dispatch channel listed specifically for Watkins. The county-level EMS dispatch channels in the same county: Meeker County EMS 155.2950 MHz, narrow FM, 125 DPL.

Do fire departments and EMS use a trunked radio system in Watkins?

Yes. Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Watkins?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Watkins?

For Watkins, start with the Kimball site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.9875, 853.675 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Watkins fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Watkins are marked encrypted.